Need a Modder/Builder in Your Area? Check This Post.

telly tel

I'd like to recommend royaflushtz from SoCal. Did a dual mod of my stick and I had a pleasant experience with him. He was quick, professional, and responded with updates.

gahrling

I am the official modder for the London 2012 Olympic games.

jdm714

SRK Rules say you cannot Sell or provide your Service.
Please remove your Post and come back when you meet the requirements.

MonoTekETeA

Alright guys,

The first post has been updated. I have given everyone plenty of time to respond. (More then I would like, but that is my busy life atm)

Anyone still on the first post IS active. They had personally responded to my message to tell me so. PM them and they should respond.

Anyone going to East Coast Throwdown? Lets meet up.

Jamin3131

Add me to the list please :)

Toronto, Ontario

- Dual Mods (360>PS3 & PS3>360)
- Multi-Console Mods
- Stick Repairs re-wiring, Button and Stick swaps
- Classic Stick Mods

Can be found easily at A&C games on Mondays or Wednesdays during Casuals.

SpeeDPuNcH

telly tel, post: 6945344, member: 1825 wrote:

I'd like to recommend royaflushtz from SoCal. Did a dual mod of my stick and I had a pleasant experience with him. He was quick, professional, and responded with updates.

How do I go about contacting him? And how much do his dual mods cost?

AlbinoD90

Just wanted to poke my head in again and note that I'm still modding in the NJ area. I know ECT is this weekend so if anyone needs a dual mod done I'll be available most of tomorrow to crank them out, provided the client [you] provide the pcb. Check the OP for info

Dracula_X

I do mods in Iowa every now and then. I'm About 20 min outside of Des Moines.

Dual mods, Multi console
stick and button swap outs
full wooden sticks (occasionally),
rewiring and general stick repair stuff.

Getting a hold of me via pm is your best bet.

extravagant

Does anybody mod sticks in the area of San Jose, California?

Dracula_X

extravagant, post: 7123933, member: 8036 wrote:

Does anybody mod sticks in the area of San Jose, California?

rtdzign - San Jose Bay Area/Mountain View

Dr.Zero

is it possible to dual mod a ps3 pad so that i could use it on an xbox ive tryed the ps2 pad converter for it and hate the ps2 pad if someone could help me that would be sweet

Frankfurter

Anyone in the las Vegas area?

Jamin3131

Frankfurter, post: 7143162, member: 43969 wrote:

Anyone in the las Vegas area?

There will be quite a of them next week :)

MasherMan

Nobody in Alabama. Damn.

Kingofqueensz

Anybody in NYC? I message the two guys on the first page with no luck. My ps3 isn't registering my joystick inputs and i have a TvsC stick which needs to be dual modded.

gahrling

Kingofqueensz, post: 7267789, member: 45730 wrote:

My ps3 isn't registering my joystick inputs

What stick do you have?

bullre

Looking for a dualmodder in tokyo, te stick 360>ps3

gahrling

bullre, post: 7268051, member: 49257 wrote:

Looking for a dualmodder in tokyo, te stick 360>ps3

You could easily do that yourself with no need to solder. Depending on your model of stick then all you'd need is either a Kitty TE or a Cerberus board.

Kingofqueensz

gahrling, post: 7267863, member: 8713 wrote:

What stick do you have?

i have a madcatz se with a seimitsu joystick

gahrling

Kingofqueensz, post: 7268460, member: 45730 wrote:

i have a madcatz se with a seimitsu joystick

There are two switches on the SE turbo panel. Make sure they are set to 'DP' and 'Unlock'

Then check that the joystick harness cable is still properly attached. The SE harness is really bad quality and will slide off a proper joystick without some kind of glue.

Kingofqueensz

gahrling, post: 7268505, member: 8713 wrote:

There are two switches on the SE turbo panel. Make sure they are set to 'DP' and 'Unlock'

Then check that the joystick harness cable is still properly attached. The SE harness is really bad quality and will slide off a proper joystick without some kind of glue.

i opened up my stick and indeed the harness was off. now my question to you is what kind of glue can i use

J6U

Anyway to mode Street Fighter Volt the app? I don't think there is any. It's got obm files and pvr files.

gahrling

Kingofqueensz, post: 7268612, member: 45730 wrote:

i opened up my stick and indeed the harness was off. now my question to you is what kind of glue can i use

Glue gun + hot glue, silicone sealant, putty.. pretty much anything that is not permanent, non-conductive, and non-corrosive.

Don't use super glue.

In an ideal world you'd simply solder on an official Sanwa or Seimitsu harness.

randyliu02

BartStation, post: 4596069, member: 8613 wrote:

Things I can do
Dual mod
Joystick/Button Swaps
Padhacks the usual.
Make Artwork
USB Repair
General troubleshooting.


It's better for the person to supply the parts for me to do, but I can also buy the parts and mod.

I am in the Bay Area, San Francisco. I am usually at the Freedemonia sessions.

hey i'm looking for someone to help me with my fightstick i'm located in berkeley

GrayFawkes

Anyone in Orlando,FL? I need a TE repaired.

Trajedi

Looking for a modder in the San Diego for my Hori Arcana Heart 2 stick. Thanks.

Sephz

What kind of requirements do you have to fulfill to get on the list?

Super Rob64

Is there a mod out there where the headset jack can be replaced with audio sound from the game, so when i plug in my headphones to my fightstick I can only hear the game sounds? I have a Hori VXSA stick and I'm wondering if modders can do that.

Rufus

Super Rob64, post: 7371211, member: 37534 wrote:

Is there a mod out there where the headset function can be replaced with audio sound from the game, so when i plug in my headphones I can only hear the game sounds and such? I have a Hori stick and I'm wondering if modders can do that.

It's doable -- though I think regular wireless headphones would be a cleaner way to go.

Super Rob64

Rufus, post: 7372504, member: 5673 wrote:

It's doable -- though I think regular wireless headphones would be a cleaner way to go.

Yea but I also don't want to take away the games sound from my opponent, what kind of headphones do ppl like Fchamp and Daigo use?

mr.mortified

you might as well just get an audio splitter or something like a mixamp for your headset then

MonoTekETeA

Sephz, post: 7365836, member: 57473 wrote:

What kind of requirements do you have to fulfill to get on the list?

Darksakul, post: 5957178, member: 32315 wrote:

First Welcome to the community of stick modders and builders.

Post where are you from, we don't need a address just a State and home city, if you are Outside the US, the Country, region/province you are from and city

To be on the safe side you you to also be eligible for selling on the Trading post, which from your profile you are. And you have a gallery of your works that also good.

jdm714

This?
http://shoryuken.com/forum/index.php?threads/125664/

underwing

Trajedi, post: 7356706, member: 66266 wrote:

Looking for a modder in the San Diego for my Hori Arcana Heart 2 stick. Thanks.

I'm a bit swamped, but might be able to squeeze you in sometime next week or the week after. I'm in the La Jolla area. What kind of work do you need done? PM me.

lmczitz

To:
jdm714 and underwing:
Yeah it's like that but the case will be housing the side of the pad with the buttons . It will have with quick release screws to open it fast and easy (The idea is to make the case as accessible as possible). The pad will not be broken and or soldered inside so it will be connect it to MC Adapter the way it was meant to. This way you can swap your favorite pad whenever you want without the need of rewiring anything."The Arcade Pad" will be Plug-And-Play from the very beginning.

jdm714

*I did not look at your Post fully before typing this.*
*After finishing this, I see that I am typing what you want.*

The Pad has to be broken and soldered.

The only way I can think of not opening and soldering is adding FGWidget Controller.
But there will not be total modularity going on.

FGWidget Converter can be set for SNES, Saturn, PlayStation.
A switch can be added if want to switch.
Else it will just be one of those.

FGWidget Converter what does, is take an SNES or Saturn or PlayStation.
Takes the Data Signals and converts into Raw Signal.
These Raw Signals can be connected to something.
Connect to Buttons and Joystick if want.
Connect to another PCB is cool thing.
Another PCB creates Converter.

Now since you do not want to butcher a Pad, the FGWidget Converter comes in.
There will be a Saturn Controller Extension connected to FGWidget.
This way you just connect your Saturn Pad to the Extension piece.
No need to cut your Saturn Controller Cable.

Okay, so now you have Saturn Pad connected to Extension end.
Extension connected to FGWidget Converter.
FGWidget converting Saturn Data to Raw.

Now from the FGWidget Converter, the Raw Signals will go to Multi-Console Cthulhu.
From Multi-Console Cthulhu, connect to Action Buttons of the Case.
Then connect Imp v2 to Multi-Console Cthulhu.
Then modular Outgoing Cables go to Imp v2.

Done.

Since you don't want to break Pads, you're limited to what the FGWidget Converter supports, regarding Plug and Play.

lmczitz

Jdm714, yes! that is how I like to do it.
Right now the most important thing for me is finding a person with the skills to make a compact, stylish (in a simple way) & functional case big enough to feet the small arcade buttons and the pad. Which buttons will be best for this kind of project? korean or japanese? I am thinking about the one with smallest height to keep the case as thin as possible.

rtdzign

Please remove me from the list.

CanadianDstryr

Edited my post.
My school schedule is more forgiving this semester, so I deleted the part about not working while school's in session (I also apparently forgot to take down that bold "not open for buisness" text over the summer, explains the lack of requests lol).

Also, I moved to Winter Park, still in Central Florida, but now nearer Orlando.

PandaStyle

Is there anyone in the Lodi, CA area? I've got a Fightstick Pro that I would like to have dual modded

Onslaught X

Ugh, none for Colorado?

The FG scene is virtually dead here...

MonoTekETeA

Rtdzign removed and Canadian's location altered.

CasualGamerCC

Wondering if I can get on the list. I own a physical store in Corpus Christi, TX. We host video gaming tournaments and I provide dual mod and technical services to people in town. I can also handle shipping if people would like to send in a stick over long distance. We can handle custom artwork requests, all types of PCBs and light mods, MC Cthulhu cables, etc. We are also a retailer of Sanwa, Seimitsu, and Happ Controls arcade parts.

Edit: We are also capable of troubleshooting down to a component level as I have equipment for BGA and SMT soldering and desoldering.

abkallday

Abkallday
Columbia, South Carolina

I can add new buttons and sticks to fightsticks.

Ver314

Onslaught X, post: 7450700, member: 70310 wrote:

Ugh, none for Colorado?

The FG scene is virtually dead here...

are you serious? have you not checked out extrafresh.net?

Onslaught X

Ver314, post: 7564526, member: 4257 wrote:

are you serious? have you not checked out extrafresh.net?

No...why?

Bojann

I also mod and create arcade joysticks

Bojan Novaković - Serbia
my site: www.arkadna-prodavnica.com
gallery: www.podmornice.com/stick/galerija.html

abkallday

Add me to the modders list

MonoTekETeA

Gah, sorry man. I missed you and CasualGamers.

Abkallday, you have been added.

Casual Gamers, you need more posts and time on the forum and then I will add you. (6 months, 50 posts)

AVikingsBeard

Anyone in California near the central valley? Like around Visalia or somethin?