The NEW Official Arcade Stick Art Thread NO IMAGE QUOTING!

1303304305306307309»

Comments

  • jadflatjadflat Joined: Posts: 19
    some recent commissions;

    vhBZY72.png

    AqRDncB.jpg

    NxemDNc.png

    SE5CXeD.png
  • TastyWhiffTastyWhiff Joined: Posts: 20
    I've been really lazy with my art so all i've been doing is just get some wallpaper then slap it on to some template lol with minor adjustments. This is for my hori bbcpex stick since the art was already fading.
    pSWe29Jv
    b725pfWm
  • P3G3DesignsP3G3Designs Artist Of The Century Joined: Posts: 69
    edited November 6
    recent-work-2.png
    recent-work-1.png


    Recent commission //PM for Portfolio //PM for Rates //
    Post edited by P3G3Designs on
    Project
    Shop
    "Im with my friends doing hood s*&^ "
    Check out the link for inquiries
  • FoxBlazeFoxBlaze Lets get it. Joined: Posts: 95
    edited November 5
    Some of the request I've done recently

    Street Fighter Madcatz SE
    DMuPs-KW0AAuwMY.jpg

    Android 18 & Bulma Madcatz SE
    DMhk7jYX4AASuIh.jpg

    Nemesis Panzer 3
    DM6yFHIW0AEJcEb.jpg

    Breath of Fire Foehammer
    DNcTssEW4AAwzIK.jpg

    Card Captor Sakura Qanba Q2/Crystal
    DNj9_a4W4AIm7In.jpg

    Persona 4 Arena HRAP V3/VX
    DNkex9oX4AAM8Wd.jpg

    Ultra Instinct Goku AFS (Allfightsticks)
    DNvMFZ2X0AAW7Nc.jpg

    I'm also up for more so if interested, PM me for portfolio and rates.
    https://arcadiacustoms.tumblr.com/
    I take commissions upon request so if interested, Feel free to Hit me up through a PM, Visit my Twitter Page (https://twitter.com/ArcadiaCustoms) or contact me through my Email foxblaze2016@gmail.com.

    PSN: ArmadaBeatz
    Steam: Armada
    Fightcade: Armada101
  • 16bit_man16bit_man Joined: Posts: 7
    Hi all

    Are there any members based in the uk e
    Who offer printing and cutting of artwork for thr arcade stick above.
    If so please get in touch.

    Many thanks
    K
  • 16bit_man16bit_man Joined: Posts: 7
    Hi all

    Are there any members based in the uk e
    Who offer printing and cutting of artwork for thr arcade stick above.
    If so please get in touch.

    Many thanks
    K
  • NoJohnsNoJohns Strike the earth! Joined: Posts: 23
    A new WIP I've got going. Not satisfied with it yet but I'm getting there.
    UlUG50Z.png
    PSN: JOKERSHENCHMAN
    Steam ID: StarGoon
    Twitter: NoJohnz
  • WildstarMCMLXXIWildstarMCMLXXI Joined: Posts: 2
    edited November 10
    WIP Quanba 3 stick:

    https://ibb.co/duqWAw
  • WildstarMCMLXXIWildstarMCMLXXI Joined: Posts: 2
  • butterojbutteroj You Are Luminous Joined: Posts: 1,582
    Threw this together this afternoon. Thinking of building a stick for my kid for Xmas. Thoughts?

    607840_6665d91374f441c2b7a70b082fe90e3f.jpeg

     

  • sadboysadboy Joined: Posts: 63
    edited November 11
    butteroj wrote: »
    Threw this together this afternoon. Thinking of building a stick for my kid for Xmas. Thoughts?

    Give it to your son, then tell him, "Breath. Feel the air. Feel that wind on your hands. Feel the arcade stick, with your fingers actuating the microswitches, moving your character. And the cover art, (insert son's name), look at the layout. Its aesthetic catching your eye, resonating with you, traveling to every nerve in your body, like a shock! You're no longer you now. You're part of something greater. You're a proud owner of a one-of-a-kind butteroj arcade stick. It's yours. (long pause) Now use it!"
  • PotatokingPotatoking Joined: Posts: 20
    edited November 11
    Any Kolin fans out there?

    tfRa3AV.jpg

  • earthwormbenearthwormben Joined: Posts: 47
    16bit_man wrote: »
    Hi all

    Are there any members based in the uk e
    Who offer printing and cutting of artwork for thr arcade stick above.
    If so please get in touch.

    Many thanks
    K

    Cutting? Have you heard of scissors and a knife?
    There's loads of places that do printing in the UK at a good rate. Max spielman and Ryman are 2 I use, they don't have correct sizes of paper so after designing your image, make sure it's the correct size in the file (in cm/inches) and your dpi is not more than the printer can handle (unlikely)
  • SpartacusONESpartacusONE Joined: Posts: 2
    Could any of you highly skilled gentlemen make a few cool Templates with the images below for an Injustice Arcade Stick?
    I've tried but failed miserably at trying to make cool accents around Ballstick and Buttons :(
    The Tatsunoko ones - I'm trying to make it so the art is on the stick side or below buttons so it's visible and not covered by buttons.
    Any help is greatly appreciated!

    [img][/img]Tatsunoko-Vs.-Capcom-9_zpsq5hlumwi.jpg
    [img][/img]wf4hzaar7mafeiat458p%201_zpsx45wxexa.jpg
    [img][/img]thumb-1920-598222_zpsbit2io7e.jpg

  • NoJohnsNoJohns Strike the earth! Joined: Posts: 23
    Could any of you highly skilled gentlemen make a few cool Templates with the images below for an Injustice Arcade Stick?
    I've tried but failed miserably at trying to make cool accents around Ballstick and Buttons :(
    The Tatsunoko ones - I'm trying to make it so the art is on the stick side or below buttons so it's visible and not covered by buttons.
    Any help is greatly appreciated!

    Can't see your images. Don't use Photobucket, they're some greedy MFers. Use Imgur or something comparable.

    PSN: JOKERSHENCHMAN
    Steam ID: StarGoon
    Twitter: NoJohnz
  • jopamojopamo Stuck in Silly-con Valley Joined: Posts: 1,268
    and put the /img tag at the END of your links
  • ZeonLiveZeonLive Zeon Int. Joined: Posts: 64
    Hey I'm looking for someone who could make a top and bottom panel for a MadCatz VS Edition Fightstick. I'm looking for panels using Apocalypse (X-Men) as the theme with blue and black as the colors. I have some images I'll link below and where I think they could be placed. I messaged jjsparx about the commission but I just noticed he hasn't been active in 2 months so I might not get a response lol.

    Below are the images I have in mind:

    For the top image I'm thinking of having this image on the left hand side:
    3359865-uncanny+x-men+%23335+-+page+4b.jpg

    Maybe some usage of this image on the right hand side if it can be cropped well:
    a824f3ea6ea1796b7f906b1bc14ffbfe.jpg

    For the bottom panel I would be interested in using this image:
    apocalypse_by_800poundproductions-da120xl.jpg

    I'm thinking of a modern looking background if possible but I'm open to anything that looks good.

    Thanks for any help or messages.


    SFIV: Bison, Balrog
    SSFIV: Bison, Balrog
    SFxT: (Bison x Heihachi, Kazuya x Raven)
  • SpartacusONESpartacusONE Joined: Posts: 2
    Ah sorry about that.
    Ended up spending some time on my CP and actually made out..
    Not bad for my 1st lol
    RP8e67B.jpg

  • P3G3DesignsP3G3Designs Artist Of The Century Joined: Posts: 69
    Recent Commission
    Top & Bottom Design
    eqCOWKq.jpg
    gvqmrAL.jpg

    Always professional and High Quality Designs
    Slots Open // Click for Portfolio //
    Project
    Shop
    "Im with my friends doing hood s*&^ "
    Check out the link for inquiries
  • earthwormbenearthwormben Joined: Posts: 47
    P3G3 that is very nice, how much you charging just incase I ever decide I want to add some extra flare to my case (I can design but have no imagination)
  • Eddie_DominguezEddie_Dominguez Joined: Posts: 56
    I've got two requests that I would like done. The first is a Trunks themed stick for a Hori RAP V.Kai and the second is Zoro (One Piece) themed stick for a Madcatz TE2.
Sign In or Register to comment.