ZD Arcade Control Encoder And ZD ReMatch (PS3/PS2/PC) (The most cost efficient PCBs to date!)

2456710

Comments

  • TortaTorta A piece of Cake Joined: Posts: 715
    tell them to add psx compatibility too ;_;
    VAMOS
    MCCthulhu >> all

    KOFXIII: Ash/King/Vice
  • rukawa_kaederukawa_kaede ({「決最終戦奥義」}) Joined: Posts: 3,413
    I'll buy two
  • carugacaruga Joined: Posts: 538
    Does anyone have a contact for the guy who makes these? The forum linked in the OP requires admin approval befoer I can send the guy a PM, and it's taking a while for me to get it.
    Nice read.
  • CUTWESTCUTWEST There is no rivalry. =( Joined: Posts: 1,771
    hope i don't get infractioned for this but....

    tmz0518@gmail.com


    that's his paypal and probably personal email as well. And here are his instruction he told me when i ordered mine.
    Please go to Paypal send money -> Personal -> Other -> $14.75 USD (or $17.50 if you want the set of extra wires.)

    On the page, please make sure you set up bank transfer or paypal balance as your payment if possible. (Prefer not credit card or debit card to avoid fees.)

    Please make sure to put your name and shipping address in the special note area. In personal transfer, Paypal doesn't include shipping info in the transaction automatically.

    Thanks again!
    Vigo
  • sikwiditsikwidit Joined: Posts: 2,027
    hope i don't get infractioned for this but....

    tmz0518@gmail.com


    that's his paypal and probably personal email as well. And here are his instruction he told me when i ordered mine.
    Please go to Paypal send money -> Personal -> Other -> $14.75 USD (or $17.50 if you want the set of extra wires.)

    On the page, please make sure you set up bank transfer or paypal balance as your payment if possible. (Prefer not credit card or debit card to avoid fees.)

    Please make sure to put your name and shipping address in the special note area. In personal transfer, Paypal doesn't include shipping info in the transaction automatically.

    Thanks again!
    Vigo
    are these the new ones with the home button
  • CUTWESTCUTWEST There is no rivalry. =( Joined: Posts: 1,771
    are these the new ones with the home button


    No. But If i were the lot of you I would wait till he does. Hes made a couple post on there basically stating that he already has the new boards in hand. Just doing some test on them or something of that nature.
  • CUTWESTCUTWEST There is no rivalry. =( Joined: Posts: 1,771
    New Boards have arrived.
    you know the drill.
    [copypaste]

    I exclusively have a brand new item available, a new encoder called the ZD ReMatch.

    The ReMatch is an easy and affordable encoder, just like the regular Zero Delay Encoder, but it has some new features built specifically for arcade fighter stick builder in mind.


    Here is the brand new ZD ReMatch in all it’s glory.

    ZDReMatch.jpg

    ZDReMatchFrontBack.jpg



    Here are some of the features unique to the ZD ReMatch:

    PS3 Home Button support – The PS3 is the console of choice for most fans fighters with arcade controls. At last an easy and affordable board for using with the PS3. The ZD encoder has an input for all the PS3 buttons, right down to the L3 and R3, but only the ZD ReMatch has a button input for the home button, making menu access, game switching, power down, and joystick reassignment simple.

    Longer USB cable - The USB cable for the ReMatch is over 7 feet long. This gives players ample room to plug a standalone arcade panel to their computer or console and sit across the room with ample cable length. The USB cable also has built in cable bushing so that the cable can be snug fit into a control panel.

    Joystick wires and 13 button wires included – While the regular ZD allows up to 12 buttons and joystick control panel, it by default comes with enough wires for 8 buttons. The ZD ReMatch has 13 button inputs and comes with wires for every input button.

    Option for wiring sets to fit Japanese arcade controls – I am now offering the option to choose between Japanese control wire sizes or American/European sizes. I have button wires to fit either the .110 Japanese buttons, or the .187 US button switches. I also offer the option to switch out standard up/down/left/right wires for the 5 wire cables normally used for Sanwa Seimitsu and other Japanese joysticks

    Option for macro button and turbo controls – This board has an optional special function feature to create macro functions. By simply wiring up a button to the macro input on the board, a player may allow the ability to create a preset button combination macro for pulling off combos and finishing moves. Like the regular ZD encoder, there is also an option to set up turbo fire as well.

    Here is what you will receive:
    1 ZD ReMatch Encoder Board
    1 Extra long USB cable
    Your Choice: 1 Japanese joystick 5 wire cable OR 4 standard wires up/down/left/right joystick wires.
    Your Choice: 13 size .110 button wires (for Japanese style controls) OR 13 size .187 buttons wires optimized for Standard Arcade control switches.
    1 set of instructions

    The final price for the ZD ReMatch will be $22 shipped in the US. International is only the cost difference in shipping added, so PM me for a price quote. Also, when you PM me an order, please specify your wire preference.

    Due to the fact that this is a new item, I only have a small initial inventory. I will be ordering more depending on demand, and it will take me roughly a week and a half to restock inventory. I will post here if I am out of inventory. This is a brand new item, and I am currently the only person outside of the manufacturer to sell it. I have been meticulously been testing the board and it passes my quality check.
    [/copypaste]

    You know what ta do, help the homie out big and gets the ordering! The more you buy, the more he sells!
  • kikimaru024kikimaru024 Mid-tier scrub Joined: Posts: 1,693
    Only thing I don't like is the macro feature, but then only scrubs rely on it.

    Very good value product you've created here.
    Seimitsu & K-sticks > Sanwa JLF.
    This truth is not universally acknowledged.
  • TortaTorta A piece of Cake Joined: Posts: 715
    can you confirm it works with KOFXIII? :)
    VAMOS
    MCCthulhu >> all

    KOFXIII: Ash/King/Vice
  • sikwiditsikwidit Joined: Posts: 2,027
    can you confirm it works with KOFXIII? :)

    Seeing as this is just a device used to tell the console which button is pressed, I am going to take a safe bet and yes it will work for KOFXII as long as you are using the ps3 version.

    Also i ordered 1, cant wait to get it. Seems like a nice cheap solution.
  • CUTWESTCUTWEST There is no rivalry. =( Joined: Posts: 1,771
    Let me go on ahead and make this clear since ive been getting a lot of PMs lately from people sending me their personal information.

    I am NOT the guy that sales these. Please read thoroughly and click on the links I have provide to where you can get these from the man himself.

    Thank you.
  • vigovigo Joined: Posts: 12
    Hello! I would be the guy that is selling the ZD encoders over at the BYOAC boards. Cutwest has been awesome enough to post this thread, so I figure it is about time I get my butt over here to introduce myself and allow you guys to purchase directly from me.

    I haven't quite figured out how you sent PM's over here, or if there are restrictions for new members on sending PM's. Feel free to send me a message if you are interested in making a purchase or have questions. I should hopefully have it all figured out soon and be able to respond.

    Thanks!
    Vigo
  • vigovigo Joined: Posts: 12
    ....and while trying to figure things out, I noticed that you have to be a member for 6 months or have administrator approval to sell on this site. I know I haven't been really directly selling, but I don't want to get in trouble only a few minutes after becoming a member, so if an admin could give me approval I would be very appreciative. I am reputable over at BYOAC. ;)
  • kikimaru024kikimaru024 Mid-tier scrub Joined: Posts: 1,693
    Hello! I would be the guy that is selling the ZD encoders over at the BYOAC boards. Cutwest has been awesome enough to post this thread, so I figure it is about time I get my butt over here to introduce myself and allow you guys to purchase directly from me.

    I haven't quite figured out how you sent PM's over here, or if there are restrictions for new members on sending PM's. Feel free to send me a message if you are interested in making a purchase or have questions. I should hopefully have it all figured out soon and be able to respond.

    Thanks!
    Vigo
    Yo Vigo,

    can you please test the board with KOF XIII?
    The game has a horrible coding error and doesn't work with some PCBs/converters.
    Seimitsu & K-sticks > Sanwa JLF.
    This truth is not universally acknowledged.
  • vigovigo Joined: Posts: 12
    Sure, I can do that. I don't own KOF XIII for the PS3, but I can rent it.. Hang tight a few days and I will get back to you on that one.
  • poonpoon always get a receipt Joined: Posts: 1,257
    bump for the motherfuckin scourge of carpathia
    I'm the hero Bamboo Stick... who are you?
  • vigovigo Joined: Posts: 12
    Yo Vigo,

    can you please test the board with KOF XIII?
    The game has a horrible coding error and doesn't work with some PCBs/converters.

    Hey kikimaru,

    I tested the board with KOF XIII last night and it worked fine for me.

    Is this just a coding error where I'd know right away if it would work 100% or not, or do I need to do something to trigger the error? I still have the game for today, so if further testing is needed let me know and I will be happy to do so.
  • kikimaru024kikimaru024 Mid-tier scrub Joined: Posts: 1,693
    Hey kikimaru,

    I tested the board with KOF XIII last night and it worked fine for me.

    Is this just a coding error where I'd know right away if it would work 100% or not, or do I need to do something to trigger the error? I still have the game for today, so if further testing is needed let me know and I will be happy to do so.
    The game has an issue where some pads will not work at all.

    So if the ZD works 100%, then that's all we need to know :)
    Seimitsu & K-sticks > Sanwa JLF.
    This truth is not universally acknowledged.
  • CUTWESTCUTWEST There is no rivalry. =( Joined: Posts: 1,771
    BUMP!
  • vigovigo Joined: Posts: 12
    Thanks for the bump, cutwest! I figure this is a good time to point out I have these boards up for sale on eBay. feel free to take a look:

    http://www.ebay.com/sch/zdarcade/m.html?item

    I now offer an updated ZD ReMatch and a Playstation 2 cable that can connect to it.

    This PS2 feature is only available on this new red revision of the ZD ReMatch Encoder, and the PS2 cable is specially designed for it.

    Let me know if you have any questions! Thanks!
    Vigo

    $(KGrHqR,!p!E9dSgTitRBPmh8osRig~~60_1.JPG
  • SpacedOutCadetSpacedOutCadet AKA roejo Joined: Posts: 55
    is there an analog button on the board for the ps2? Might work great with an Xtokki for a Xbox360 compatible stick as analog is needed for the guide. If not i know the rematch boards have an L3, so that paired with the select button will bring up the xbox guide according to the converters manual i believe. I have the original rematch board it works awesome!
  • GeorgeCGeorgeC Joined: Posts: 2,850
    The PS2 plus ZD/PCB is a very good deal!
    That will take care of something like at least 65% of us unless we have to have compatibillity across ALL systems...

    I'll keep this PCB in mind since I still have a half-dozen empty shells/partially refitted joysticks to complete.
    This PCB/cord/combo might go into 2-3 of those cases...

    (Goes without saying, I'd still go with MC Cthulu for my Sega needs... No intention of buying a 360PCB although I might buy a 360 stick and upgrade with a Kitty in the future.)
  • emphaticemphatic Joined: Posts: 478
    That's a good deal indeed. Check your email, vigo.
    I love shmups and never play fighting games.
    Here's my Guwange stick: http://www.emphatic.se/?p=197
  • Kid KaosKid Kaos Embrace Shadaloo Joined: Posts: 1,072
    Has anyone tested this pcb in a hitbox style control? If so was there any issues with pressing down+up or left+right? Or will I need an sodc cleaner from toodles
    All that remains are just peices of the past
  • danjohnny5danjohnny5 Joined: Posts: 147
    So does the one listed on eBay come wih the ps2 cable or do we need to request it?
  • vigovigo Joined: Posts: 12
    is there an analog button on the board for the ps2? Might work great with an Xtokki for a Xbox360 compatible stick as analog is needed for the guide. If not i know the rematch boards have an L3, so that paired with the select button will bring up the xbox guide according to the converters manual i believe. I have the original rematch board it works awesome!

    Well, I I am not sure if the PS3 home button functions as the analog button on the PS2 or not. I will have to check with the manufacturer. Unfortunately, most my PS2 collection got lost in my last move. All I have left is Tekken Tag and the Sims, and I don't think either of those games have any change based on whether or not the analog is pushed, so I don't think I can test myself. I will let you know if the I find anything out though.
  • SpacedOutCadetSpacedOutCadet AKA roejo Joined: Posts: 55
    So does the one listed on eBay come wih the ps2 cable or do we need to request it?
    you have to order it separately it's stated in the ebay page for the board. if you click his ebay name in the corner it'll take you to a page with the usb/ps2 cable item listing.
  • vigovigo Joined: Posts: 12
    So does the one listed on eBay come wih the ps2 cable or do we need to request it?

    The PS2 cables are currently gone. Someone bought up my entire inventory of them yesterday. Didn't buy encoders though. Must have thought they were a good deal for hacking purposes. I will be ordering more cables. This time around I will be selling them bundled with encoders instead of individually since I was selling the cables at cost. All my cables sold off, and I made like 18 cents in profit. Haha. I guess I didn't think people would be trying to buy them individually.

    It will probably be about 15 days until I have the new shipment in. Sorry about the confusion there.
  • The_ThirdThe_Third Poverty Gamer Joined: Posts: 1,009
    How does the stick switch (POV hat, xy-axis) work? Is it a button or can it be implemented using a DPDT?

    I am really interested for at least two ZD Rematch pcb's. How's international shipping gonna work out (Philippine Islands)? I might also have someone buy it for me in US if I deem it too much of a hassle.

    EDIT: If I buy it off eBay, I am getting .110 quick disconnects and a 5-pin joystick connector yes?
  • kikimaru024kikimaru024 Mid-tier scrub Joined: Posts: 1,693
    Has anyone tested this pcb in a hitbox style control? If so was there any issues with pressing down+up or left+right? Or will I need an sodc cleaner from toodles
    It's probably safer to get/make an SOCD cleaner (or play games where that's not an issue, like non-Capcom games ;) )
    Seimitsu & K-sticks > Sanwa JLF.
    This truth is not universally acknowledged.
  • MizkreantMizkreant JLF Hater Joined: Posts: 202
    Is there an option to order wiring with .187 QDs?
    Joysticks tried: Sanwa JLF, Seimitsu LS-55, Seimitsu LS-58, Myoungshin Fanta (medium rubber grommet), Crown 309MJ
    Favorite so far: LS-55 with bat top and octo gate
  • BurningKyoBurningKyo Joined: Posts: 36
    The PS2 cables are currently gone. Someone bought up my entire inventory of them yesterday. Didn't buy encoders though. Must have thought they were a good deal for hacking purposes. I will be ordering more cables. This time around I will be selling them bundled with encoders instead of individually since I was selling the cables at cost. All my cables sold off, and I made like 18 cents in profit. Haha. I guess I didn't think people would be trying to buy them individually.

    It will probably be about 15 days until I have the new shipment in. Sorry about the confusion there.
    >_>
    I've PM'd you on Ebay >_<
  • vigovigo Joined: Posts: 12
    >_>
    I've PM'd you on Ebay >_<
    Replied! :)
    Is there an option to order wiring with .187 QDs?
    Yes, I can do .187QDs. I can also sub out the 5-pin with 4 QD wires as well. Just send a message of what you want for wires when purchasing.
    It's probably safer to get/make an SOCD cleaner (or play games where that's not an issue, like non-Capcom games ;) )

    Yeah, it always dominates on down with both U and D are pushed. Same with Left when L and R are pushed. SOCD cleaner would be needed.
    How does the stick switch (POV hat, xy-axis) work? Is it a button or can it be implemented using a DPDT?

    I am really interested for at least two ZD Rematch pcb's. How's international shipping gonna work out (Philippine Islands)? I might also have someone buy it for me in US if I deem it too much of a hassle.

    EDIT: If I buy it off eBay, I am getting .110 quick disconnects and a 5-pin joystick connector yes?

    The POV Hat is pretty much for PC use. There is a button that will switch the joystick to POV hat, and it can be used to set up a secondary set of joystick controls. Also good for setting up function commands. There is a button toggle for it, so any momentary switch could be used to switch to POV Hat

    I ship internationally, you should be able to calculate it on the ebay page.

    The Rematch does come with .110 QDs and a 5-pin joystick connector. If you want to swap out the 5 pin for wires, or change .110s to .187s, just make a note on the puchase and I can make the substitute.
  • The PhantomnautThe Phantomnaut Too obsessive over Korean arcade parts. Joined: Posts: 1,785
    PS2 compatibility?! This will make modding projects much more easier and I hope the Etokki Xtokki PS2 to 360 converter works with it! Is it possible to have a PS2 only cable work on it?
  • PinoyPrydePinoyPryde Rhythmic Button Mashing Joined: Posts: 1,183
    Are they currently in stock? And has anyone tried using this in a hitbox?
    I mash buttons and stomp my feet to music

    Steam ID/PSN: ArcadeStatic
  • Explorer200Explorer200 Joined: Posts: 444
    Does anyone know if the ZD Rematch will work with the xtokki adapter?
  • Hero of South TownHero of South Town Joined: Posts: 140
    Do you have a wiring diagram for these new red ZD's? They no longer have the PS3 button notation just numbered buttons, and I'm also not sure which one is supposed to be the Home button on them.
    AREYOUOKAY
  • vigovigo Joined: Posts: 12
    Did you order it from me? The diagram is right in the included instructions.
  • Hero of South TownHero of South Town Joined: Posts: 140
    Yeah I bought it from you, the instructions got stuck in the envelope and I didn't see them.
    AREYOUOKAY
  • Davidov07Davidov07 Joined: Posts: 16
    just sent you a conversation. im interesten in 2 zd encoders. thanks
Sign In or Register to comment.