Rollie Electronics - Sanwa OBSC 24mm 2.90 ea. 30mm 2.95 ea.

13031323335

Comments

  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    Cutwest, that's COLD.
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • MotoyukiMotoyuki Joined: Posts: 256
    Has anyone purchased the latest flash 1 from focusattack.com or directly from ponyboy? Are all the problems sorted out?
    ·
  • Pablo_the_MexPablo_the_Mex HARDBody Joined: Posts: 7,482 ✭✭✭
    I am curious as well, an update would be nice.
    ·
  • defghuidefghui Joined: Posts: 822 ✭✭✭
    Has anyone purchased the latest flash 1 from focusattack.com or directly from ponyboy? Are all the problems sorted out?
    I am curious as well, an update would be nice.
    yea i was one of the first to put the preorder in. there were problems before but they've been worked out now. works just fine.

    i got mine directly from ponyboy
    :mp::hp::qcf::qcf::lk: ftw
    ·
  • HomelessHomeless Joined: Posts: 78
    Is there a review anywhere that compares this to a regular TP-MA?
    ·
  • Seven7Seven7 Vengence is Nigh Joined: Posts: 99
    Sent you an email a couple days ago ponyboy.
    "My blade spares no one. If you do not wish to meet your death, do not return to this place."
    Testament-GGXX

    -thanks to tigergenocide for the avatar-
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    edited September 2013
    Rollie Flash 1 Core Optical Joystick PCB Kit $29.95!!!

    The Kit will contain the following:
    ( 1 ) Flash 1 Optical PCB
    ( 1 ) Flash 1 PCB Cover
    ( 1 ) Yellow Dust Cover
    ( 1 ) Blue Translucent Shaft Cover
    ( 1 ) 5 Volt Harness

    Please contact us at jpipp@ymail.com or purchase direct from Focus Attack.
    www.focusattack.com

    Thanks,

    Ponyboy
    Post edited by ponyboy on
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • Jeremy Jay F.Jeremy Jay F. Joined: Posts: 46
    Any way to buy just the shaft and dust covers? I'm buying one Core set but want two sets of covers. I think They would look good on the Chun.
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    Jeremy Jay F. Please contact Focus Attack they will be selling them shortly on their web site.

    Thank you,

    Ponyboy
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • jpenguin77jpenguin77 I just keep gettin back up Joined: Posts: 220 ✭✭
    I installed the ps360+ and I just put in the Rollie Flash 1 joystick pcb. For some reason the left motion is constant and right-up to right-down are not responding. The +5v is in the vcc screw hole shared with the TE panel brown wire.
    Avian Smackdown
    ·
  • DarksakulDarksakul Your lack of faith disturbs me Joined: Posts: 11,895 ✭✭✭✭✭
    Brown wire? Photos of your wiring please
    You must defeat Sheng Long to stand a chance.
    there is a unwritten rule that every Full Moon some clueless poster has to stumble into this forum and tout their own perception as hard fact.
    ·
  • jpenguin77jpenguin77 I just keep gettin back up Joined: Posts: 220 ✭✭
  • jpenguin77jpenguin77 I just keep gettin back up Joined: Posts: 220 ✭✭
    edited October 2013
    Post edited by jpenguin77 on
    Avian Smackdown
    ·
  • jpenguin77jpenguin77 I just keep gettin back up Joined: Posts: 220 ✭✭
    @ponyboy did @jmanDMC get with you about my replacement request? Seems this one may have issues.
    Avian Smackdown
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    jpenguin77, sorry for the problem. A replacement is on its way. You should receive today if not definitely on Monday.

    Thank you,

    Ponyboy
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • jpenguin77jpenguin77 I just keep gettin back up Joined: Posts: 220 ✭✭
    Thanks so much I can't wait.
    Avian Smackdown
    ·
  • jpenguin77jpenguin77 I just keep gettin back up Joined: Posts: 220 ✭✭
    Hey so I just put it in and guess what... WORKED LIKE A CHAMP!!! Thanks so much John!!! I'll send you the old one. Do you have a label for me? jpenguin77@yahoo.com
    Avian Smackdown
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    Just re-stocked on the Rollie Flash 1 Kits.

    29.95 ea.

    Contact me at jpipp@ymail.com or focusattack.com

    Thank you,

    Ponyboy
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • ZensoukenZensouken SWAGGASAURUS REX Joined: Posts: 1,169 ✭✭✭
    Hey, wondering if it's at all possible to choose a different color for the translucent shaft cover that comes in the kit? Or is this something I should be asking the folks over at FA?
    ULTIMO MADUROS Y CHIMICHANGAS TRES: SIDE OF DOS EQUIS
    Stridering since 1998; I play pragmatic and dirty. You will eat pringles and hate me for it.
    PSN IDs: "superschure" [USA] / "suupaashaa" [JPN]
    3DS FC: "1564-4856-0905"
    ·
  • DJYinDJYin Joined: Posts: 160 ✭✭
    I enjoy playing with the Rollie gateless, will this damage it?
    ·
  • eczangiefeczangief GOD OF 1-HANDED ROM Joined: Posts: 1,860 ✭✭✭
    Its affordable enough that I think you can go gateless without too much worry. Years ago I was using a micro switch JLF gateless and within a couple weeks I cracked the solder on most of the switches.

    You may want to reinforce the inner ring of the Rollie if you are dead set on using it gateless. That's an interesting idea and I may see about trying it.
    I can't believe I'm Magnetro.
    ·
  • eczangiefeczangief GOD OF 1-HANDED ROM Joined: Posts: 1,860 ✭✭✭
    On topic, sort of....

    With the 3 pin harness, the center one is +5v correct? What are the other two? And is the pinout the same as with an authentic Flash1?
    I can't believe I'm Magnetro.
    ·
  • sethian0sethian0 B PoSiTiVe - B KiND Joined: Posts: 996 ✭✭✭
    @eczangief pretty sure the middle is 5v it is on the sparkce and looking at the picture above the the rollie looks the same as the sparkce (power pinout wise)

    I know when you are testing the ohmz on the sparkce you touch the left and right pins next to the 5v. hope this helps.
    ·
  • Half-RoHalf-Ro Omae wa mo shinderu.... Joined: Posts: 1,990
    Picked one up to try out since I am such a big optical stick fan. I can honestly say it works great, one thing is that the stock jlf spring is too light imo. Any suggestings for a stiffer spring?

    ·
  • NENDONENDO I will meditate and then destroy you. Joined: Posts: 2,356 ✭✭✭✭✭
    I would try a 2 and 3 pound spring at least.
    ·
  • Half-RoHalf-Ro Omae wa mo shinderu.... Joined: Posts: 1,990
    Found some on PAS site. Going to try 2 / 3. Is 4 really tight? I only need one spring obviously I just want that stick to return to neutral quickly like my happ / wico p360s.
    ·
  • NENDONENDO I will meditate and then destroy you. Joined: Posts: 2,356 ✭✭✭✭✭
    They're pretty cheap. Why not get all three just in case? I'll pay you for the 4 lb if you dont like it.
    ·
  • Half-RoHalf-Ro Omae wa mo shinderu.... Joined: Posts: 1,990
    Good point, just trying not to be wasteful if I can help it. I dont own any other japanese sticks.
    ·
  • NENDONENDO I will meditate and then destroy you. Joined: Posts: 2,356 ✭✭✭✭✭
    No worries. At the very least you should get the 2lb and 3lb. If you decide to get the 4lb to try and don't end up liking it just shoot me a PM and I will take it off your hands. Hell, I'll even take all of the springs that you dont like if you choose to let them go.
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    You can purchase those springs at Focus Attack.

    Ponyboy
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • NENDONENDO I will meditate and then destroy you. Joined: Posts: 2,356 ✭✭✭✭✭
  • K1rnupiimaK1rnupiima Joined: Posts: 16
    I got mine today! Works like a charm after some trouble. The black PCB cover was not quite the best fit for the sanwa square JLF gate. I had to find the right orientation for the gate's 'pins' for it to rest on the cover in the most relaxed position. If the cover bent even slightly under tension the signals would not register correctly.

    Now working fine and it's just a pleasure to use :]
    ·
  • XorXe-YaGaMiXorXe-YaGaMi Teh Mexican Tier Joined: Posts: 121
    K1rnupiima wrote: »
    I got mine today! Works like a charm after some trouble. The black PCB cover was not quite the best fit for the sanwa square JLF gate. I had to find the right orientation for the gate's 'pins' for it to rest on the cover in the most relaxed position. If the cover bent even slightly under tension the signals would not register correctly.

    Now working fine and it's just a pleasure to use :]

    Can you tell me in what store do you buy your Pcb?

    Focus attack doesn't have in Stock, I am a international costumer so for save on shipping I prefer buy all my items in the same store.

    Thanks

    I love this Game
    ·
  • DarksakulDarksakul Your lack of faith disturbs me Joined: Posts: 11,895 ✭✭✭✭✭
    @XorXe-YaGaMi
    Scroll up @iNENDOi said you can get one at Paradise Arcade
    You must defeat Sheng Long to stand a chance.
    there is a unwritten rule that every Full Moon some clueless poster has to stumble into this forum and tout their own perception as hard fact.
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    XorXe-YaGaMi: Focus Attack is re-stocked on the Rollie Flash. You can now purchase from them or contact Rollie Electronics direct.

    Thank you,

    Ponyboy
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • UncleGaryUncleGary Joined: Posts: 144 ✭✭
    edited February 2014
    I just installed a Flash I got from focusattack and the diagonals are really spotty. I saw in the thread that older models had problems, so is there any fix for this on the newer ones?

    Update: I put a stock actuator in and it was working fine. Are there any oversize actuators that will work with the flash?
    Post edited by UncleGary on
    ·
  • bafiaris13bafiaris13 strava tsibukia Joined: Posts: 538
    Hey Ponyboy are you still selling flash kits directly?
    KOI..
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    You may order direct from Rollie Electronics or contact Focus Attack

    Thank you,

    Ponyboy
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • PresidentCamachoPresidentCamacho Dwayne Elizondo Mountain Dew Herbert Camacho Joined: Posts: 1,519 ✭✭✭✭✭
    UncleGary wrote: »
    I just installed a Flash I got from focusattack and the diagonals are really spotty. I saw in the thread that older models had problems, so is there any fix for this on the newer ones?

    Update: I put a stock actuator in and it was working fine. Are there any oversize actuators that will work with the flash?

    I recall reading somewhere here that oversized actuators are no good in an optical.
    ·
  • DarksakulDarksakul Your lack of faith disturbs me Joined: Posts: 11,895 ✭✭✭✭✭
    UncleGary wrote: »
    I just installed a Flash I got from focusattack and the diagonals are really spotty. I saw in the thread that older models had problems, so is there any fix for this on the newer ones?

    Update: I put a stock actuator in and it was working fine. Are there any oversize actuators that will work with the flash?

    I recall reading somewhere here that oversized actuators are no good in an optical.
    There no point with a over-sized actuator in a optical joystick.
    Especially as some aftermarket actuators can have the wrong amount of reflectivity for a optical board to work. A White or metal actuator can be too reflective and cause errors, while a larger actuator can throw off timing of the optical board.
    The Flash-1 is designed with the stock Sanwa actuator in mind.
    You must defeat Sheng Long to stand a chance.
    there is a unwritten rule that every Full Moon some clueless poster has to stumble into this forum and tout their own perception as hard fact.
    ·
  • Half-RoHalf-Ro Omae wa mo shinderu.... Joined: Posts: 1,990
    ponyboy wrote: »
    You may order direct from Rollie Electronics or contact Focus Attack

    Thank you,

    Ponyboy

    Focus attack has been out of stock for awhile, I would like to order one.
    ·
  • Half-RoHalf-Ro Omae wa mo shinderu.... Joined: Posts: 1,990
    Make that two. Any word on restock at focus attack?
    ·
  • Wade GarrettWade Garrett Joined: Posts: 131
    They say they keep emailing rollie with no luck
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    Focus Attack will be restocked by 4-14-14 or you can place an order direct with Rollie Electronics. You may contact me at jpipp@ymail.com.

    Thank you,

    Ponyboy
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • Half-RoHalf-Ro Omae wa mo shinderu.... Joined: Posts: 1,990
    Just checking to see if you recieved my payment @ponyboy? I did not get a confirmation yet.
    ·
  • AsureyAsurey Joined: Posts: 8
    jpenguin77 wrote: »
    I installed the ps360+ and I just put in the Rollie Flash 1 joystick pcb. For some reason the left motion is constant and right-up to right-down are not responding. The +5v is in the vcc screw hole shared with the TE panel brown wire.

    I have a similar problem. I have the PS360+ hooked with the Rollie Flash 1 Optical PCB. My UP direction does not respond at all. I ordered a new 5 pin cable from Focus Attack to see if that solved my problem but nothing... It is the second time this happened. :(

    It's a bummer because I really like it. The feel is really good.
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    Asurey, if you have an issue with your board please contact me directly.

    jpipp@ymail.com

    Thank you,

    Ponyboy
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    Sorry, I made a misstate. Focus Attack will be restocked by 4-24-2014

    Thanks,

    Ponyboy
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • ponyboyponyboy Rollie Electronics Joined: Posts: 339
    Rollie and Focus Attack are fully restocked with Flash1 Kits.

    Ponyboy
    If its good to ya, its gotta be good for ya.

    Twitter: @RollieFlash1
    ·
  • AU79NZAU79NZ Joined: Posts: 2
    i've been wanting to get a rollie for the longest time. glad to see their back in stock.

    how does the rollie compare to Toodles Spark?

    thank you
    ·
Sign In or Register to comment.