Hori Real Arcade Pro Thread for all versions (IN PROGRESS, COULD USE YOUR HELP AND INPUT) v2

2»

Comments

  • NENDONENDO I will meditate and then destroy you. Joined: Posts: 3,343
    Does anyone know how much of a hassle it would be to properly mount an ls-32 in a HRAP 2?

    Shouldn't be any trouble.
  • dikodesudikodesu Joined: Posts: 2
    can someone tell which mouting plate to get for my HRAP 4 kai? also will the LS-32-01-shaft will be long enough?

    thanks
  • NENDONENDO I will meditate and then destroy you. Joined: Posts: 3,343
    dikodesu wrote: »
    can someone tell which mouting plate to get for my HRAP 4 kai? also will the LS-32-01-shaft will be long enough?

    thanks

    You need the S plate. With the S plate th length should be fine.
  • StoneDrumStoneDrum Joined: Posts: 1,096
    are there any hori fightsticks that also have a d pad?
  • DarksakulDarksakul Your lack of faith disturbs me Joined: Posts: 21,529
    StoneDrum wrote: »
    are there any hori fightsticks that also have a d pad?

    If they had a D-pad they would be a fight game pad not fight stick.

    "You must defeat Sheng Long to stand a chance."
  • XorcistXorcist Evil Genius Joined: Posts: 337
    Is it possible to use screw-in buttons to mod the Hori RAP 4 Kai?
  • BolSadguyBolSadguy Just a Bol of Sadguys Joined: Posts: 1,463
    Yes
  • DarksakulDarksakul Your lack of faith disturbs me Joined: Posts: 21,529
    Xorcist wrote: »
    Is it possible to use screw-in buttons to mod the Hori RAP 4 Kai?

    Yes. I know its possible cause I done it.
    "You must defeat Sheng Long to stand a chance."
  • XorcistXorcist Evil Genius Joined: Posts: 337
    Looks like 7 out of the 9 buttons are fine, the L1 button and the Options button require further case modification. I used a Dremel tool to route out some of the case plastic so the screw-rings would fit those buttons, there were no issues between buttons though, which is what I was most worried about.
  • anzharanzhar five times Joined: Posts: 922
  • fifty8mmfifty8mm Patines Americanos Joined: Posts: 430
    Does anybody know where the VC line is on the Hrap2 (orange and white. Ps2)?
  • NENDONENDO I will meditate and then destroy you. Joined: Posts: 3,343
    fifty8mm wrote: »
    Does anybody know where the VC line is on the Hrap2 (orange and white. Ps2)?

    Pin 8 on the PSX cable is VCC counting from left to right. Use a multimeter to probe for continuity from that pin to the PCB. Keep in mind that one pin is skipped on the controller cable so 8 is second from the right.
  • fifty8mmfifty8mm Patines Americanos Joined: Posts: 430
    IMAG0137_zpsuosl2ckl.jpg
    do you mind telling me which one is it in this pic?
    I don't have a multimeter, I basically want to test some optical joysticks i received last night.
  • NENDONENDO I will meditate and then destroy you. Joined: Posts: 3,343
    fifty8mm wrote: »
    http://i1259.photobucket.com/albums/ii558/smokeacid/IMAG0137_zpsuosl2ckl.jpg
    do you mind telling me which one is it in this pic?
    I don't have a multimeter, I basically want to test some optical joysticks i received last night.

    Can't tell you without probing it. Please buy or borrow a multimeter.
  • kooliokoolkooliokool Joined: Posts: 55
    Is there a pcb diagram for the HRAP4 Kai? I've been looking for one because I want to swap the pcb with the new PS4 brook with audio. I want to use the hrap pcb in another stick and I want the brook to be able to use as many buttons as possible on the side pcb.
2»
Sign In or Register to comment.