The Official TE2, TE2+, TES+, PANTHERA EZ MOD Thread

1235

Comments

  • jopamojopamo Stuck in Silly-con Valley Joined: Posts: 1,183
    Who's Jaesen?
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    Hey Jaesen, looking into re-doing my X1 TE2 ps360+/padhack stick with a UFB and an EZMOD. In your FAQ there is mention of getting this setup to work with a Kaimana Khameleon by making a modified mini-usb cable - can you give more details on that? I'm assuming that the mini side of the cable gets plugged into the KK - where does the other end go? Also - slightly off topic - are Khameleon's still available somewhere, or am I better off with a Kaimana mini? Thanks!

    You need to make a cable thats a USB mini to the Molex KK 4 pin to replace the USB internconnect included in the kit.

    Honestly though, use a mini and just pop the top to update it. The TE2 is too easy to open to not use the Mini.... or rather get an LVT3 and be done with it.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • bloodstrikebloodstrike Joined: Posts: 8
    jopamo wrote: »
    Who's Jaesen?

    The guy I ask questions of when I can't type ;)

    Hey Jaesen, looking into re-doing my X1 TE2 ps360+/padhack stick with a UFB and an EZMOD. In your FAQ there is mention of getting this setup to work with a Kaimana Khameleon by making a modified mini-usb cable - can you give more details on that? I'm assuming that the mini side of the cable gets plugged into the KK - where does the other end go? Also - slightly off topic - are Khameleon's still available somewhere, or am I better off with a Kaimana mini? Thanks!

    You need to make a cable thats a USB mini to the Molex KK 4 pin to replace the USB internconnect included in the kit.

    Honestly though, use a mini and just pop the top to update it. The TE2 is too easy to open to not use the Mini.... or rather get an LVT3 and be done with it.

    Thanks, makes sense. I'd need the PS4 LVT3 if I got that route, right? (This one)
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    Yeah, I assume so. I think Paradise can answer which is the best for the EZ MOD.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • POPSKNZPOPSKNZ Joined: Posts: 51
    The EZ Mod & Brooks UFB combo for my TE2+ works great! Very easy install! Thank you Jasen! Are these 2 boards common ground?

    I have a Remora, FGWiget, Uilas LEDs, and Arceyes 3 from some older sticks that I'd like to try to use for the TE2+. But which one!?

    I think I can power either LED controller board using the Vcc and push button GND spots on the Brooks UFB or maybe on the EZ Mod USB terminal block. Since the J3 terminal block on the Brooks UFB wasn't used to wire up my push buttons, I believe and can use it as my "IN" for 1P, 2P, etc for the FGWiget LED controller, "OUT" for 1P, 2P,etc would be wired to the Vcc on the LED (in this case, Uilas). All grounds for LEDs and push buttons would be daisy chained together.

    Maybe use this with the Remora using the TES terminals instead of the TE for the kill ground to be accounted for? I had Arceyes 3 hooked up to my Remora and rewired it to work on a TE PS3.

    I'd go the LVT3 route but those are rarely ever available. Again, great product!
  • S-LaughterS-Laughter Joined: Posts: 342
    S-Laughter wrote: »
    I'd appreciate some assistance - I just want to make sure I'm getting the right things together to fix my stick. I have the Ryu TE2+ stick, and already purchased the Brooks ps4+ fighting board to install into my te2+ stick, is this the right ez mod for my situation?
    https://paradisearcadeshop.com/electrical/1831-jasen-s-customs-ez-mod-te2.html?search_query=te2++ez+mod&results=4

    Only ArcadeShock sells the TE2+ EZ MOD and it does not work with the PS4+ board, only the Universal Fighting Board.

    Thank you so much for helping me get the right part on order. I'm excited to be able to use my stick again!
    < SF5 - Steam zentooshi - CFN Shosuko - PS4 S-Laughter - CFN Rainbo-nana-Mika >
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    POPSKNZ wrote: »
    The EZ Mod & Brooks UFB combo for my TE2+ works great! Very easy install! Thank you Jasen! Are these 2 boards common ground?

    I have a Remora, FGWiget, Uilas LEDs, and Arceyes 3 from some older sticks that I'd like to try to use for the TE2+. But which one!?

    I think I can power either LED controller board using the Vcc and push button GND spots on the Brooks UFB or maybe on the EZ Mod USB terminal block. Since the J3 terminal block on the Brooks UFB wasn't used to wire up my push buttons, I believe and can use it as my "IN" for 1P, 2P, etc for the FGWiget LED controller, "OUT" for 1P, 2P,etc would be wired to the Vcc on the LED (in this case, Uilas). All grounds for LEDs and push buttons would be daisy chained together.

    Maybe use this with the Remora using the TES terminals instead of the TE for the kill ground to be accounted for? I had Arceyes 3 hooked up to my Remora and rewired it to work on a TE PS3.

    I'd go the LVT3 route but those are rarely ever available. Again, great product!

    Yes, EZ MOD and UFB are common ground.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • MoosekingMooseking Future Champion of the World. Joined: Posts: 76
    Getting "unknown device" on win 7, when connecting to PC.

    Blinking "LED3" light on the EZMOD TE2+ Board.

    Modded with brooks UFB, Updated safely to 2.0

    Won't register at all on ps4 either.

    Anyone else experienced this issue?
  • arcade_wuzarcade_wuz Joined: Posts: 4
    Is the Panthera easy mod kit compatibel with an Atrox for XOne? Own an Atrox and want an multi platform stick. Buying an extra Panthera is not very cheap ;(. By the way does it have Nintendo Switch Support? There is no word over Nintendo in the description. But UFB have Switch support with the newest firmware.

    Thx in advance
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    arcade_wuz wrote: »
    Is the Panthera easy mod kit compatibel with an Atrox for XOne? Own an Atrox and want an multi platform stick. Buying an extra Panthera is not very cheap ;(. By the way does it have Nintendo Switch Support? There is no word over Nintendo in the description. But UFB have Switch support with the newest firmware.

    Thx in advance

    Not tested at all, so I can't officially say yes, though it's unlikely. The UFB supports switch.


    Mooseking wrote: »
    Getting "unknown device" on win 7, when connecting to PC.

    Blinking "LED3" light on the EZMOD TE2+ Board.

    Modded with brooks UFB, Updated safely to 2.0

    Won't register at all on ps4 either.

    Anyone else experienced this issue?

    Blinking LED3 is correct. It pulses so I know it's code is working.

    There are a ton of threads on the Win7 discussion on the UFB. Please look through them using the search functions of SRK.

    As for PS4... Certify you are at the most current FW. If the UFB is working on other systems and it's being recognized for the updates... Signs point to the PS4.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • MoosekingMooseking Future Champion of the World. Joined: Posts: 76
    Hi Jasen,

    Thanks for responding.

    Combing through everything to try and identify where the issue is, appreciate you clarifying the LED3 Light.

    The firmware was successfully updated on the UFB to the current release, I'll comb through the threads after additional troubleshooting. And post results, gotta say the EZ Mod Kit has been great so far, thanks so much for all your hard work.
  • k701k701 Joined: Posts: 48
    edited August 13
    I took one for the team and ordered a Panthera EZ mod kit for my xbone atrox. It works with a few notes:

    A few face buttons need to be moved around. No big deal.

    The pins for the Razer LED on the Atrox are the opposite way on the Panthera. I simply inverted them using jumper cables.

    I got the home button to work by putting jumper cables directly to the UFB, but I would like to use the pins on the left. Does anyone know the schematic for these? More specifically I'm looking for a ground pin, a 3 volt pin (to make the led next to the home button light up), and the home button pin. Here's a pic of what I'm talking about.

    AftrXat.jpg

    So if anyone knows which of those pins are:

    GND
    Home
    3v/vcc

    that would be greatly appreciated.



    Edit: Nevermind, figured it out. Panthera EZ mod working perfectly with xbone Atrox with a few jumper cables. Every feature works including lock button/LEDs etc:

    K5BJegF.jpg

    Post edited by k701 on
  • The_Real_PhoenixThe_Real_Phoenix electronoob Joined: Posts: 189
    I've managed to install the EZmod on a TES+:

    BuoYZ4Zl.jpg
    ersbL2Sl.jpg

    I had to remove the punch/kick connector (too high), replaced it with a classic pin-header and made my own dupont to JST connectors (and also replace right angle JST for straight ones)
    D7C9S3Zm.jpgyMHWQhdm.jpg

    Not sure if it was the best way to do it, but it worked. :smiley:
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    I did the same thing at EVO last year... it took a bit of work (which is why I dont recommend it) but it does work. The TES+ EZ MOD coming this fall will make it far easier and cleaner :)
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • stringfellowstringfellow Custom Rig. Common Man. Joined: Posts: 38
    Hi Jasen, am I correct to understand that if I were to mod my Killer Instinct TE2 XB1 stick with the EZ Mod + UFB combo, that the installation is exactly the same as the installation video on your TE2 XB1? Finger's hovering over the "buy" button on Arcadeshock at the moment. :p
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    Hi Jasen, am I correct to understand that if I were to mod my Killer Instinct TE2 XB1 stick with the EZ Mod + UFB combo, that the installation is exactly the same as the installation video on your TE2 XB1? Finger's hovering over the "buy" button on Arcadeshock at the moment. :p

    Its not "exactly" the same... but its pretty close. I didnt do the light board hack in that video.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • stringfellowstringfellow Custom Rig. Common Man. Joined: Posts: 38
    Hi Jasen, am I correct to understand that if I were to mod my Killer Instinct TE2 XB1 stick with the EZ Mod + UFB combo, that the installation is exactly the same as the installation video on your TE2 XB1? Finger's hovering over the "buy" button on Arcadeshock at the moment. :p

    Its not "exactly" the same... but its pretty close. I didnt do the light board hack in that video.

    That being the case, if I wire the LED PCB into the EZ MOD, everything else would work except the button wont light up? I'm okay with that. Or I'll just bypass the LED board altogether. I just need the KI XB1 stick to work on PS4 and PC, since I've sold off the XB1. It should work, right?
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    Hi Jasen, am I correct to understand that if I were to mod my Killer Instinct TE2 XB1 stick with the EZ Mod + UFB combo, that the installation is exactly the same as the installation video on your TE2 XB1? Finger's hovering over the "buy" button on Arcadeshock at the moment. :p

    Its not "exactly" the same... but its pretty close. I didnt do the light board hack in that video.

    That being the case, if I wire the LED PCB into the EZ MOD, everything else would work except the button wont light up? I'm okay with that. Or I'll just bypass the LED board altogether. I just need the KI XB1 stick to work on PS4 and PC, since I've sold off the XB1. It should work, right?

    If you wire the EZ MOD board and LED Board together, the lights won't light. Everything else works. The LED board can be lit (only ON or OFF with EZ MOD) if you look a few posts up at the beginning on the "hack" to do it. Its a software controlled item that I didn't incorporate into the EZ MOD for a variety of reasons, the main being re purposing the HAPTIC button to be something else by jumper.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • stringfellowstringfellow Custom Rig. Common Man. Joined: Posts: 38
    Roger that. I'm happy enough that the KI stick can be used back again. Missing the LED lights is fine with me.
  • ragingcyclonusragingcyclonus Joined: Posts: 32
    I've managed to install the EZmod on a TES+:

    BuoYZ4Zl.jpg
    ersbL2Sl.jpg

    I had to remove the punch/kick connector (too high), replaced it with a classic pin-header and made my own dupont to JST connectors (and also replace right angle JST for straight ones)
    D7C9S3Zm.jpgyMHWQhdm.jpg

    Not sure if it was the best way to do it, but it worked. :smiley:

    Did you record a video of your mod?
    Madcatz TES+ (Brook PS4+audio)
    SFV/ST: Ryu
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    I've managed to install the EZmod on a TES+:

    BuoYZ4Zl.jpg
    ersbL2Sl.jpg

    I had to remove the punch/kick connector (too high), replaced it with a classic pin-header and made my own dupont to JST connectors (and also replace right angle JST for straight ones)
    D7C9S3Zm.jpgyMHWQhdm.jpg

    Not sure if it was the best way to do it, but it worked. :smiley:

    Did you record a video of your mod?

    This is a very in depth mod using the method he did above; it will work but its tough. I did one at EVO2016 and it took me a hot minute as well as a lot of cutting, crimping, etc. If you can wait just a few more weeks I will have TES+ EZ MODs that eliminate all of this.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • The_Real_PhoenixThe_Real_Phoenix electronoob Joined: Posts: 189
    I've managed to install the EZmod on a TES+:

    BuoYZ4Zl.jpg
    ersbL2Sl.jpg

    I had to remove the punch/kick connector (too high), replaced it with a classic pin-header and made my own dupont to JST connectors (and also replace right angle JST for straight ones)
    D7C9S3Zm.jpgyMHWQhdm.jpg

    Not sure if it was the best way to do it, but it worked. :smiley:

    Did you record a video of your mod?

    Currently de-rushing. This will be a TES+ and a TE2+ conversion to hitbox. Pics of final products are the "check out my new arcade stick" thread. But as Jasen said you shoud wait for the TES+ EZ Mod.
  • NeoMasamuneNeoMasamune Joined: Posts: 4
    edited August 23
    Edit: Mevermind. The problem was with ufb firmware. It seems it didn't update properly the first time even though the launcher said that it did.
    Post edited by NeoMasamune on
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    edited August 23
    This sounds like a UFB issue, not an EZ MOD issue. If the PC is showing everything working that tells me that all of the signals are being passed to the UFB properly and its interpreting the signals properly. I would suggest updating the consoles to ensure they are at the most current FW.

    The Jumpers and LED functions do not affect the UFB in anyways, they just route signals around.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • NeoMasamuneNeoMasamune Joined: Posts: 4
    edited August 23
    I tried reflashing the UFB again and it seems to be working now. Fingers crossed while I do more testing. Super bizarre because I literally just flashed it an hour earlier. Super strange.

    Either way, thanks for making the EZ Mod such a easy and intuitive install :)
  • POPSKNZPOPSKNZ Joined: Posts: 51
    I have a Remora, FGWiget, Uilas LEDs, and Arceyes 3 from some older sticks that I'd like to try to use for the TE2+. But which one!?

    Update, I tried using the Remora but had issues with using both the TE and TE S C1 and C2 JST connectors to the Brooks UFB. Couldn't get 1K and 2K to function using TE JST pin connectors.

    I ordered some 6 pin JST 2.0 mm to try the TE S connectors, didn't know where to wire Kill ground except to a ground point on the UFB, but that had some more issues. None of the buttons worked and 2 directions work, but the wrong way. I kinda freaked thinking I bricked the EZ Mod and UFB, although the LEDs in them were working. I unhooked everything and pulled the Remora outta there. Hooked up the EZ Mod and UFB, plugged it in and everything worked fine. Im sure its something with the kill ground not wired properly but I moved on.

    The FGWiget works! I added a balltop LED and some 24mm Peles for Start and Select. Again, great product Jasen!
  • deejaycribdeejaycrib Joined: Posts: 69
    hi everyone
    i feel bad , my stick make the same with my original pcb TE2+ :( (i have EZ TE2+ with UFB brook)
    after playing like 30min / 1 hours, my directions of my stick are locked my character , jump infinite or infinite gard :( why?
    i disconnected the cable of sanwa JLF when is happen, and still jump infinite
    i trying another one cable usb, i updated my UFB brook
    someone can help me please?



  • deejaycribdeejaycrib Joined: Posts: 69
    Please can someone help me? i'm seriously disapointed by EZmod TE2+ same shit like TE2+ original pcb :(
    again today , my stick In the middle of the match, sometime is like disconected ,nothing works , all butons, stick direction...
    and sometime, the direction of stick infinite "left" or "jump left" infinite WHY?? and when it happen i need to unplug usb 2 or 3 times for is work normally :(
  • deejaycribdeejaycrib Joined: Posts: 69
    mini_727622image1.jpg
  • POPSKNZPOPSKNZ Joined: Posts: 51
    I'm not sure; I have the same setup but I do not have the J7 and J2 pins connected based on your picture. I only use it for PS4 and PS3.
  • deejaycribdeejaycrib Joined: Posts: 69
    @POPSKNZ i use too only on PS4 , i will try to play without J2 & J7
    that so weird ,what happening with my stick :(
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    Are all of the firmware's up to date on console and the UFB?

    Have you retried re-flashing the UFB again?

    What happens when you use it on an XBOX ONE? What happens when you use it on the PC?

    How long does it take until it stops working?

    Remember, the EZ MOD is just a complex wiring harness with some processing to use the LEDs and indications on the TE2... the Brook UFB is still 100% the brains of the setup. Comments such as : "i'm seriously disapointed by EZmod TE2+ same shit like TE2+ original pcb :(" isn't going to get a whirlwind of people ready to help diagnose your problem especially when there isn't enough information in your post to help pin-point the issue. Please answer the questions above and do some testing on the PC for at least 30 minutes. If you have no games on the PC you can always run JOY.CPL and use the properties of the joystick to test inputs.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • deejaycribdeejaycrib Joined: Posts: 69
    @Jasen Hicks thanks so much for answer

    my ps4 have the last firmware, and i installed 2 times firmware in brook ufb

    it stop between 40 min / 1 hour and more , and it happen all the time on match, never happen on menu

    i dont have Xbox one, i will test on computer tomorrow

    sorry for my bad comment, im lil bit frustrating by this problem for a second time





  • deejaycribdeejaycrib Joined: Posts: 69
    @Jasen Hicks
    i updated again firmware before to play
    and i played today on my PC, after after a moment, same like ps4 nothing work ,
    no direction no button :( , need to unplug & plug stick for he work again :(
  • deejaycribdeejaycrib Joined: Posts: 69
    First time:


    Second time :


    here pics with joy.cpl
    mini_990464StickTE2.jpg
    mini_932026stick2.jpg
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    Either something is not connected right or the Universal Fighting Board has a fault. Whomever you bought the UFB from you should contact and arrange a replacement if you are within their replacement policy timeline.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • deejaycribdeejaycrib Joined: Posts: 69
    @Jasen Hicks so u tell me "something not connnected right" i disconnected J2 & J7 same like @POPSKNZ and my stick workin fine! no problem
    so u have any idea why my problem come when i plug J2 & J7?
  • Jasen HicksJasen Hicks JasensCustoms.com Joined: Posts: 2,359
    Brook changed the function of J7 to be a SOCD mode change instead of a touchpad, so i suspect the signals from the Touch Pad are causing some weird thing to happen in the processor of the UFB since its not getting the expected signals for a mode shift and instead getting unrecognized signals from the TouchPad. The J7 shouldn't have any effect since its the DP/LS/RS mode selector. I'm willing to bet that connecting J7 will be fine.

    They changed this a few months ago, about a year after the EZ MOD was designed.
    2014 SRK Tech Talk Company of the Year Jasen's Custom Creations - Custom Joysticks, SuperGuns, Vinyl Graphics
    2014 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick - Retired
    2015 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 2.0 - Hiatus
    2016 SRK Tech Talk New Arcade Stick of the Year Panzer Fight Stick 3 - Order Now!
    2016 SRK Tech Talk Member of the Year Co-Recipient

    Have a question? Use the JASENSCUSTOMS HELP DESK

    - Jasen's Customs Facebook, it's where the pictures are: Facebook
    - Follow me on Twitter to see what new things I am adding: Twitter
    - Learn something? I try to publish all of my creations and tutorials at: The TechBlog
  • deejaycribdeejaycrib Joined: Posts: 69
    @Jasen Hicks what the function is on "J2"? thanks
Sign In or Register to comment.