Issue with Madcatz TES+

CrownieCrownCrownieCrown Joined: Posts: 19
edited August 4 in Tech Talk
Hello, I recently bought a Madcatz TES+ and I'm having an issue with the LB/R2 button being shown as always being pressed. It seems like this person https://support.focusattack.com/hc/en-us/articles/115001863283-TE2-and-TE-S-stuck-input-issue-fix had a similar problem and concluded that defective diodes were causing the buttons to stay active.

I wanted to ask if anyone knew which specific diode might be causing my problems, or had any other advice, before I get to randomly guessing which diode to desolder. Thanks in advance!

Comments

  • JackalsJackals Joined: Posts: 29
    You can track down the faulty diode following the wires.

    But you can and should remove every single one of them as they are not necessary, and they could die any day.

    Target only the ones associated with an input.
    They should be labeled "Dxx" (D for diode, and xx being a number)
Sign In or Register to comment.