Hori Fighting Commander for Xbox One/ 360

Comments

  • BolSadguyBolSadguy Toronto Stick Modder Joined: Posts: 1,609
    edited February 4
    Bout damn time. Was getting tired of using PDP MKX pads for dual mods (getting the Guide signal is a bit of a pain). Hopefully it's common ground like the other HFC and just as easily padhackable
  • IanoIano Joined: Posts: 51
    Finally! I still have the PS3/PS4 one /w the rotating d-pad which I am not a big fan of. Mainly need this for PC but will be great to have the XBONE compat as well.
  • jopamojopamo Stuck in Silly-con Valley Joined: Posts: 1,311
    edited February 4
    I want one for one of my raspberry Pis with a white case!
    2hg8idx.jpg

    But not THAT much that I'm willing to wait til end of May...
    Post edited by jopamo on
  • kedawakedawa . Joined: Posts: 405
    I'll pre-order one as soon as amazon.ca has it listed.
    BolSadguy wrote: »
    Bout damn time. Was getting tired of using PDP MKX pads for dual mods (getting the Guide signal is a bit of a pain). Hopefully it's common ground like the other HFC and just as easily padhackable
    I need a replacement for that awful thing too, but I intend to actually use this as a gamepad and gut the MKX pad so I can convert my Wii U tekken stick to XB1/360. The MKX pad is crap as a controller because it registers button presses twice most of the time.

  • RandomRandom Joined: Posts: 323
    BolSadguy wrote: »
    Bout damn time. Was getting tired of using PDP MKX pads for dual mods (getting the Guide signal is a bit of a pain). Hopefully it's common ground like the other HFC and just as easily padhackable


    What does "padhackable" mean?
  • StrtFghtrMstrStrtFghtrMstr SRnk1VaBeachAlphaTeam Joined: Posts: 541 ✭✭✭✭✭ OG
    Random wrote: »
    BolSadguy wrote: »
    Bout damn time. Was getting tired of using PDP MKX pads for dual mods (getting the Guide signal is a bit of a pain). Hopefully it's common ground like the other HFC and just as easily padhackable


    What does "padhackable" mean?

    If this is a serious inquiry;
    There's a few "padhack" threads on this forum so he must be using "padhackable" to describe;
    •Easy solder points for repurposing the pcb
    •Common ground for all inputs is a bonus, adds more "padhackable" value (and moves the pcb a tier above non-common grd pcbs) that includes pairing this pcb with other common ground pcbs with the greatest of ease.
    Just a veteran player enjoying competitive SFV & the CPT
    -Kaillera veteran (GodWeapon Anti3d)
    -SFA3 Replay Tournament Champion (21-0)
    -Sticks & Setups currently owned
    -Namco w/HFC/SilentKuros/SilentHayabusa-Zippys
    -Namco stock
    -VLX 360 w/JLF+Silent Zippy&uSW mod/OBS-MX Reds+Silent O-Rings/Qanba/Seimetsu/PCBs360VX+HFC4, Jansen x5 19MM Turbo Panel
    -VLX 360 Stock
    -TE-S Six-Axis PCB w/ShinJN adapter
    -H2H setups: Zowie RLH2460HT, Asus VX238H-W & Monoprice 8204
  • LLeg3ndLLeg3nd Always Eating Joined: Posts: 279
    Yay it's up on Amazon Canada
    twitch.tv/lleg3nd
  • kedawakedawa . Joined: Posts: 405
    I've been using mine quite a bit on all three platforms(XB1,360, PC) for the past week and I have no complaints.
    I like the feel of it better than the FC4, and I think the feature set for this controller is actually better suited to fighting games than that of the FC4 as well.
    There's no simple toggle switch to change the function of the shoulder buttons, but every individual button is easily remappable. It doesn't have turbo, which isn't really a big loss, and probably an improvement for people wanting to use the controller competitively.
    I watched a youtube review that pointed out a weird smell and issues with the LED getting hot, but I haven't had either of those issues, so I think that guy must have gotten a defective one(if I had to guess, I'd say the current limiting resistor for the LED is shorted by a solder bridge, but who knows).
    I haven't looked inside mine, so I really have no idea how good it would be for a donor PCB.
Sign In or Register to comment.