5v source on agetec pcb

I have a spare agetec that I use for parts and the pcb in it is fine. I don’t need a converter when I can just take out the pcb and wire it up. The thing is though, I don’t have nor do I know how to use a volt meter so I don’t know where the 5v source is on the agetec pcb.


use the #2 pin, theres exactly 14 of them, and they are all silver coming from the memory card slot. just solder piece of wire to that and your good. use the ground from the joystick side. should be set bro :bgrin:

agetec are the only boards i use and trust on all my sticks

The blue wire