Anyone here bought a VEWLIX kit from KRAY?


#1025

Mine isn’t as nice as everyone else but didn’t really cost that much extra.

Tv
Car speakers
Small amp
2 pcb
Sand paper
Paint
Buttons
Sick

If anything it’s just time consuming. Especially if you’re new to this. That’s why you get kray to paint for you if you have the money. For me I’m too cheap to go that route haha.

Kray does amazing work that’s why I continue to buy his cabs. Can’t wait to finish my head to head this summer.


#1026

I agree on the time, definitely a lot is required and patients. As far as money spent on the cab that depends on what you decide to put in it like:
Leds
Sound system (maybe a receiver, subwoorfer)
Artwork
Paint (paint booth??)
Coin door. etc…


#1027

So I’ve run into some issues. And I’m not sure where to go next. I decided to pick up some alternate PCBs since the PS 360+ is still MIA. So I got the Godlike controls MC CTHULHU. I read all the documentation. I tested the PCB into a computer. So I wire up the joystick [Sanwa JLF] ONLY to check connections, Up, Down, Left, Right and Ground. I plug the USB A -> USB B (PS3) and the joystick does not function. It does not seem like any input is going into the PS3. Is there a setting on the PS3, I need to change? Does the PCB need to be plugged in BEFORE PS3 is turned on. I know my USB cable works…so I’m sure there is something I’m missing.


#1028

IIRC you can’t boot a PS3 with a wired controller, try starting up and signing in on the PS3 with a Dualshock 3 first. I mean if you can boot the PS3 with the DS3 and then plug in the Toodles but it still doesn’t register then power might not be flowing correctly.


#1029

I realize a wired controller can’t turn on the PS3. I thought maybe the PCB isn’t plug and play and has to be plugged into prior to the console starting up. Wasn’t sure. When tested with a CPU it shows up in the System Log under USB so its recognized. A little more about my system. Sanwa JLF -> JLF wiring harness -> PCB -> USB A -> USB -> to PS3. I thought maybe the JLF was mounted the wrong direction, but I got NO directional input from any direction. I wired up one button just to be sure and the buttons didn’t work either. The directions seem simple so, who knows?


#1030

If it comes up on the PC and you can get directional input but nothing happens with the PS3 then it might be firmware/software? You should PM Toodles directly and see if he can troubleshoot for you.


#1031

This is what i have so far let me know what you guys think

http://sphotos.xx.fbcdn.net/hphotos-prn1/536717_10100180117285564_25310593_39272228_654665656_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-prn1/542017_10100129875954594_25310593_39096319_578209372_n.jpg


#1032

same color scheme for my head to head. looks great man!


#1033

Looks good man. Did you do the painting yourself?


#1034

Nope I took it to a local auto body shop and they were able to paint it for me. I did all of the sanding and priming for them basically all the hard labor.


#1035

That’s cool man. I painted mine myself along with the sanding ect…it did not come out the way i wanted it too, but oh well maybe I’ll re-do the paint job one day. I’ll post pics once I’m completely done though.


#1036

how much did that cost you?


#1037

Looks great. I would get red inserts for the coin returns though and paint the bolts/screws on the sides black.


#1038

He did the paint for 300

Edit: He only did it that cheap because he agreed not to do any type of prep work on it.


#1039

thanks for the info.


#1040

Looks sooooo good. I called four different auto body paint places near me and NO ONE wanted to mess with my cabinet. I would have gladly paid 300-400 dollars for a paint job. Besides it cost me nearly that much in supplies to do a half as job.


#1041

Can someone upload the files for the Vewlix Control Panel and SSF4 AE movelists also? The links are dead from the previous pages… :*(


#1042

Kraylix V4 PSD Template (big file 273 MB) you’ll need Adobe PhotoShop to open it. The AE move list is in Japanese.

https://www.adrive.com/public/367e68267feab26a88e55f7cc82a9d3d47d8600fcc39693d3f8843b95a1da27c.html


#1043

Thanks!


#1044

are the LCDs being used usually 32 inches?