Check Out My New Arcade Stick! (No Image Quoting)



Would love to get a couple of 360 versions for xmas gifts. Will they be available soon? Thank you and Merry Christmas!


@elixproject - your socks are horribad.


@FrankCastleAZ, that Punisher stick is $ick!


NOIR layout, universal mounting (JLF and Fantas), lexan with countersunk holes for panel bolts.

needs artwork and other stuff of course, used a sixaxis pad with axisdapter :slight_smile:

big thanks to B-boy Tekken for the custom job! hit him up if you need some panels cut!

also thanks to @DanAdamKOF for the myoungshin fanta :slight_smile:


^can you believe i found a tekken 5 stick at the salvation army? some poor kid’s mother actually got mad enough to throw it out… probably

edit: in box too i might add


Added a mount for the wiimote.



My latest creation, hitbox with Gamefinger custom buttons. It’s 24mm thick (less then 1 inch), carries Cthulhu MC and those eyes light up.

Best Ultimate Tech Talk Hang Out Loud Edition Season V
SRK Tech Talk Awards ver. 2013. WINNERS ON SECOND POST

looks super sick, but is it actually playable when you have it in your lap? looks pretty unstable, but hell, thats a really really unique and cool layout


It’s quite heavy, plus hitbox type controllers do not require much stability, there’s no stick to jerk around =)


Looks amazing with that panel. are you planning to add a little art or etching on that? I really love the old hrap cases. Im still looking for a HRAP SE, and the HRAP 3 se.


So I FINALLY completed this stick this weekend.
I checked the “Created on” timestamp on the directory on my computer for the design specs, and it says “August 26th 2013”. So stick is about 3 1/2 months in the making, on and off.

Casing is made of solid ABS plastic. I’m a model-builder, so I tend to be more confortable working with plastic than with wood.

Front and back of the stick: All-Sanwa with a JLF and OBSF-30s, with a recessed/flush-mounted Switchcraft RJ-45 pass-through. Side buttons are L1/L2 and ST/SL/H buttons, all black Seimitsu 24mm screw-ins.

Bottom: nothing exciting here. ABS panel for the bottom, and 40mm black aluminum feet.

But you ask: "Why is there a vertical break on the top panel, and what are those little rectangles above the panel?"
I’m glad you asked!

A spring-loaded “button” allows me to stick my finger in there, and pull of either side of the top panel.
The panels are held down with neodymium magnets, and the electrical work is connected via spring contacts.

So a quick little switch and I have a full-Seimitsu MK-panel! (Ok, the MK-panel isn’t a true MK panel; it’s a modified Astro P2 and the colors are off because I just used leftovers)

Project boxes for different PCBs: I have a PS360+ and a TvC-PCB wired already, I have extra boxes for a ChImp (for PSN-PS2 games) and soon an XBO controller (for KI). The project boxes fit inside the casing after you rip off the top panels.

Instead of crimping an RJ-45 plug directly on my 10’ USB cables, I’ve started to make these instead:

And a complete picture of all my optional gear for this stick so far:

I was originally inspired by of this from a stick that @rtdzgn did about a year ago with swappable sectioned top-panels. @mr3mortified (I don’t think the @ mention is working with his username) also recently posted something with swappable full top-panels a few months ago, so his work also drove me to work harder on mine (though mine was already in-progress at the time). Props to you two for pushing me to work harder/faster.

Also have to thank @Digital717 for his tutorial here on painting MDF; while I didn’t end up with a mirror-finish as I would’ve hoped, his tutorial helped me with the polishing and stuff. Not the super-gloss finish that I would’ve wanted, but it’s still not too bad…

SRK Tech Talk Awards ver. 2013. WINNERS ON SECOND POST
Absolute Question and Answer Thread v.3 (ASK YOUR QUESTIONS HERE!)
Newbie, i need of help (modding) arcade setup
Homemade padhack "coverters" using a DB15 port?
SRK Tech Talk Awards ver. 2013. WINNERS ON SECOND POST
SRK Tech Talk Awards ver. 2013. WINNERS ON SECOND POST

SICK! always wanted to build something like that. but never had the means or motivation. mostly motivation


that stick is S-tier. might even rival some of the other sticks for GOTY


Well, that might be one of the better sticks this year, FreedomGundam!


I believe you have just won my vote for the Tech Talk award. Amazing. Fantastic work @FreedomGundam !


I finally finished my Tek-Case arcade stick. This one is Ky Kiske themed.


that white looks awesome. what is it called?


It’s called Translucent White.


Are the sides blue?? Looks really good.


Yeah it’s blue, it’s a pretty crappy picture sorry. Might replace the pic.