Custom TE stick problem getting stuck


The joystick itself gets stuck once in a while where it won’t go back to neutral , I have a round 1 TE stick that I custom dual modded , there are no wires stopping it underneath the stick itself…could this be a washer issue? If so what can be done about it, I’ve never taken the joystick itself apart…


it could just be dirty from constant play… just open the TE up and move it around to see if you can pin point the issue. if anything take the e-clip off and clean the components in there… pivot cylinder, actuator, and spring cover. I dont remember what grease some people use for the pivot cylinder but I have just cleaned it and re-seated it with no issues.