Help needed to wire an audio jack on a Fightpad PCB


#1

Hi,

I recently made a total custom stick with a madcatz fightpad pcb and I wanted to wire an audio jack (to connect the xbox 360 mic).
I just don’t understant where to wire the jack :confused:

Does anyone know where I should wire the jack ?

(the jack :
http://transistec.com/catalogue/connecteurs_adaptateurs/audio_video/fiches_jack/2_5mm/fiche_jack_2_5mm_stereo_femelle_montage_chassis_20113.php
)


#2

It can be done but for the price just get the 360 wireless Mic.

Sent from my PC36100 using Tapatalk


#3

I just didn’t know this existed :confused:

By the way, I don’t realy want to buy new accessories or things like that. As you confirmed that it’s possible, I will try to wire the audio jack on the pcb.


#4

Just get an extension cord and run it to wherever you want and drill a hole in the case for the other end with the plug. I’ve seen someone do it before but don’t remember who did it.


#5

just get a male stereo jack and plug it into the pad! than wire the 3 cables to that thing you have linked! i did the exact same thing with my old stick

Gesendet von meinem GT-I9100 mit Tapatalk


#6

Ok, after many tries, I finaly found the right connections.

I made a quick picture, in case of anyone had the same idea (even if it seems to be a “not so cool idea” :stuck_out_tongue: ) :

http://img72.imageshack.us/img72/9462/fightpadpcbwiring.jpg


#7

:slight_smile: ok well at least you figured it out. The other option was doing what others mentioned. I only suggested you just over look it and get a wireless because you could potentially mess up the PCB while soldering for Mic. Capability. You seem to 100% know what your doing though so I’m sure it will turn out great.

Sent from my PC36100 using Tapatalk


#8

Yes, it works well now :slight_smile: Thx for your advices.