hi im wondering if its possible to mod a wired xbox 360 controller so that the left bumper button would work as the A button, the A button does not need to work when the mod is complete but if it can b done it would b nice… http://www.slagcoin.com/joystick/pcb_diagrams/360_diagram1.jpg is a diagram i found if anyone can give me any insight into this that would b helpfull thx alot
Yes, it can be done. How much do you know about soldering, pcbs, cutting traces etc?
Cut trace of the original LB, then retrace the A signal with a wire to that LB. Should not be hard if you have basic soldering skill.
Cut the signal trace from left bumper. Solder button A signal to left bumber signal. If you pad is not common ground, you will need to do the same with the ground point & trace.