I need help building my own Xbox One Fighting Stick


#1

Hello, dear people of Shoryuken. I really do want to create my own Arcade Fight Stick for Xbox One, but as many websites and guides, I have visited. I can’t understand a few things. First of all why and where I need the resistors for the LT and RT buttons. The guide doesn’t help me as many photos as removed Xbox One PadHack Thread - Calling the goons “Toodles, Gummowned, Phreak and You” Do it for the Kids Can you make the procedure as simple as possible for me. Thank you!


#2

Easiest way possible:

  1. If you want to use the stock controller PCB, buy a Phreakmods Crossbone, and follow the instructions in this thread.

  2. If you’re open to using another PCB, the Brook UFB offers XBO support.


#3

Thanks for the suggestion, but I can;t buy it as I live in Europe and I don’t find any in Europe. The Brook UFB is kinds expensive.

i would like to do it myself, but I don;t understand how to add the 100 ohm resistors on the LT and RT buttons


#4

#5

better copy and paste all you can now, the forum is closing the end of the month.


#6

Thanks for the tip, I just read about that. So unfortunate. :frowning: Anyways, I still don’t understand why and how can I add the resistors to LT and RT buttons.


#7

Gimme 5 I’ll find my thread from last year, or try to anyways :slight_smile:


#8

#9

Not many pics as I was reading the labels off the boards, so if you get stuck shoot me a message and I’ll get you fixed up :slight_smile:

The short version on this is you will need to connect the soldering for lt/rt to a 3.3v source on the board with a 10k ohm resistor otherwise they give too weak of a signal to register correctly.

Would highly recommend connecting to windows and testing you get solid inputs whenever you wire them so it’s easier to troubleshoot as you go :slight_smile:


#10

How’d you go with it?


#11

what about the xbone/360 hori fighting commander pcb?