Injustice: Gods Among Us Battle Edition Arcade Stick

I sent the photoshop file I made minus the art I used for my own stick to keep the file size down.

Nice video. You know that if you remove the top plexy and the artwork you can access the Injustice joystick for removal and replace the joystick.
You however need to swap the 2 top plates as by default the Sanwa JLF mounting plate do not match up with the screw holes.
Unless you did what I did and modify the plastic, it is how I fit a LS-32 in the Injustice stick.

Oh to you others who might be asking for a template.
I have set up a Mediafire account to host the file for me.

Dark Sakul’s Injustice PSD Template. Same template I sent d3v

Thanks for the template! Mine’s coming in today finally since I didn’t preorder.

So gummo mentioned the 360 is common ground, I’m just gonna assume the PS3 is the same as well??

Can’t wait to open that bad boy up!

Thank you for the template, sir!
Time to have some fun with this thing! :tup:

A refined version of @Darksakul 's template is now available in the art thread.

You made a template that look all professional and stuff.

@Darksaul

how did u fitted the led pcb in a sanwa button? cuz it doesnt fit the led board is too big and interferes cuz its too high did u dremeled the pcb or the sanwa button?

I cut the sanwa button.
The particular button you saw was cut with a utility knife.

Amazing work Kaihong!!
I registered just now to this forum to congratulate you on such excellent work! and to ask you - where do I buy that same exact balltop & washer you have on the pics I quoted above? (Store? Website?)

Also, I have never modded in my life can you share how I may replace my Injustice Fight Stick bat stick & washer with the same ones you have?

Thanks.

That ball top is a Seimitsu Bubble Ball top, they come in various colors, the dust washer is from Art Hobbies (get the JLF - W/Shaft Cover hole size Verison)
Focus Attack, Paradise Arcade Shop and Akihabarashop carries those ball tops.

Only tools you need is a Phillips and a Flat head screw driver.

Washer is art’s site - http://www.tek-innovations.com/arthobbies/?loc=products&cat=7&subcat=&item=56
Bubble top is available on most sites that sell arcade parts
http://www.focusattack.com/seimitsu-lb-39-bubbletop-clear/
http://www.paradisearcadeshop.com/en/62-balltops

Can somebody send me the blank artwork template please?? Much appreciated.

Nvm saw the link thank u

Just got my parts from Dark (thanks).

Here is a pic of how the Injustice bat top fits on a JLF shaft /w a JLF shaft cover. It sits quite a bit lower than the Sanwa bat top and therefor has more of a throw feel compared to a JLF bat top (feels like a short version of a HAPP top (slightly thicker than the jlf bat top))

BTW: still looking to buy 1 more injustice bat top and restrictor gate.

Thanks!

You are Welcome. How the Parts are working out for you?

Injustice Type-D3v BlazBlue layout.

With three 6-button config options config options. Also added generic Injustice art.

Config 1

http://www.d3vlicious.com/storage/files/Injustice_BB_Type-D3v3.jpg

Config 2 (my preferred config)

http://www.d3vlicious.com/storage/files/Injustice_BB_Type-D3v1.jpg

Config 3

http://www.d3vlicious.com/storage/files/Injustice_BB_Type-D3v2.jpg

Of course, you can simply move the labels around to whatever suits you (unless it’s a dick 8-button config).

Download here.

and Darksakul. Thanks guys.
Some extra help needed if you guys are able…

Question 1:
Is that ball top & washer clear? Or blue? It looks blue but I am guessing that is because of the led lights.

Question 2:
Where exactly do I unscrew the shaft and batstick so I may add the new ball top & washer? Do I have to take apart the entire board? (Never done this before, thanks)

Question 3:
Is there an exact ball top size/model # for the one he is using?
(Zapf, I know you linked me to the 39 bubble top clear, but is that the same one he is using?)

Question 4:
Where do I pick up this “stock stick” he mentions he was able to fit the ball top and washer on?

Stock stick refers to the default Qanba lever that comes with the stick.

  1. That bat top and washer is clear, you can get your ball top in any color you want.

  2. Remove the bottom panel, and use a flat head screw driver.

  3. All ball tops use the same size thread. Sanwa brand bat tops need an adapter piece to fit, otherwise everything fits.

  4. The Injustice stick? try any game store or online.