Installing ASCII optical in SFIV SE stick question


#1

The ASCII optical has 6 wires, the 4 directionals, ground, and +3.3v. The standard JLF style harness that’s in the SFIV SE stick has a 5 pin w/ the 4 directionals & ground. Can I just hook up the additional +3.3v from the ASCII optical to the USB +5v red wire?


#2

the red wire on the ascii is 5v not 3.3v if you wanna install in the te stick connect the 5v from the ascii to the bottom of the TE pcb.


#3

Thanks!