Kaimana Mini LED install on a Mayflash F500

Hello all, I’m trying to install a Kaimana Mini Kit in my Mayflash F500 using my stock PCB. Even though I know its possible, I’ve found no specific information available on this install and absolutely no pictures, video or detailed step by step instructions explaining or showing the complete wiring process. In particular, drawing power and ground to the breakout board for the Kaimana mini LED driver. Any help would be appreciated.

What I have.
Mayflash F500 with original PCB
Kaimana Mini LED Kit with Mini LED Driver and LED’s for 8 Buttons
Paradise Arcade Breakout Board
20 Pin Fight Stick Harness

Continuing the discussion from Kaimana Mini LED install on a Mayflash F500:

Hey man, were you able to install? I literally have the same that you have. Did you end up having to get the Brooks pc

Hey there, welcome! Yes it’s very possible. Here’s a pic of my F300 With the Kaimana installed

You need a breakout board and the 20 pin harness to connect the breakout to

all 9 push buttons. You can purchase it from www.paradisearcadeshop.com. connect the breakout to VCC and route all 9 pushbuttons to the breakout and connect the 20 pin harness to the breakout and wire up all 9 buttons with the 20 pin connector.