Moledcule: Kaimana Theme Builder, Compiler, Flasher... ...you design... ...we code!


#17

@Dubon

Wiring
Supplying power

Yes,
[list]
[] will need both VCC and GND from the UFB to the arduino (you can use jumper wires)
[
] from the arduino just create another 3 wire cable (VCC, GND, DATA) and connect to the corresponding pins on the ws2812b
[/list]


#18

Ok, i ordered an arduino micro and 20 ws2812bs, cost of about 25€ shipped. Cant wait to try this out!


#19

circuits.io
Structures and Fade

i’m not familiar with your skill level, but thought i would share circuits.io
it’s a great little utility from the good people at Autodesk.

you can pretty much set up an Arduino / Kaimana and use that as your playground which is pretty cool
here is an example with 2 buttons and 2 ws2812b pixels.

http://moledcule.club/srk/reply/reply_11071082-0.png

just though this may help you in familiarizing yourself with the hardware


#20

I just look at it like a dual mod except with no dataswitching and the led chain added to it?


#21

circuits.io example
Kaimana Arduino

although this thread is not really about hardware support, but rather the app itself, i can still answer your question with some guidance

i have created a visual layout for you on circuit.io
and it looks like this
http://moledcule.club/srk/reply/reply_11071148-0.png

a few things to consider
[list=1]
[] you will need to power BOTH controller (ps360, ps360+, brooks, whatever) and arduino
[
] you will need to have each button switch (including joystick) connected to the
[] you will need 2 usb connections (one for the controller to play games, one for the arduino to upload sketches)
[
] @“Jasen Hicks” solved this with the Kaimana Kameleon LED Driver PCB
[/list]

connecting the arduino from the brooks
[list]
[] use female to female jumper wires
[
] connect the corresponding pins on the brooks to the arduino (including vcc & gnd)
[*] go crazy
[/list]

tips
[list]
[] you can simplify to 1 usb cable by
[
] using a dpdt switch and solder the data lines accordingly
[*] using a 2 port usb hub and burry it in your stick (the one from amazon is great since i use a Neutrik NAUSB-W-B A/B USB Feed-Through - Black)
[/list]

advanced solution
[list]
[] buy some Crimp Connector Housing: 2x10 this is for the brooks header side
[
] buy some Crimp Connector Housing: 1x1-Pin *these are for the arduino side
[
] buy some Pre-crimped Terminals 50-Piece Rainbow Assortment F-F 12" connection wires for connecting the brooks to the arduino
[/list]

again
i am more than happy to help with your hardware setup, feel free to PM me and we can take this offline


#22

Ok thanks.i think i have it pretty much figured out. The arduino is coming from china so will probably take a week or two to get here with free shipping. I also included female to female “dupont” cables with my order for piggybacking from the ufb witch i already have a pin header soldered to.

I also ordered female to male dupont cable. My plan is to make pairs of leds witch i can disconnect from the chain if i want to swap out a button by soldering male dupont cables to the first of the pair then female to the second of the pair. It sounds weird but ill post pics once (if) i get it done, then it should make sense :slight_smile:

Oh yeah im installing this in my trusty old atrox so usb is no problem since i can just open the lid for flashing the arduino.


#23

Razor Mods
including your arduino

too funny, check out my old flickr feed


#24

Lol nice. Are those arceyes or did you manage to insert your led strips on the inside of you button? I was thinking of hotglueing mine to the bottom on the underside, hopeing the light will be sufficient with the led beeing mounted on the outside rather then the inside.
I doubt mine will look this tidy when all is done though.


#25

Razor Mods
images are from 2.5 years ago

as per my most recent build, i’ll take some shots when i get home


#26

Kaimana Redux
Redux

I was asked me if i used the Kaimana Github repo code
Well, to an extent, with some modifications

You can take a look at the README.MD in my GitHub

It pretty much explains some of the efficiencies i started baking in

I recommend reading through the readme file linked above, and don’t forget to check out our Compiler as a Service

https://raw.githubusercontent.com/32teeth/kaimana-redux/master/reference/step1.png


#27

Quick question before i start soldering my leds together (they should arrive today): it is possible to assign two leds per button right? Not sure how many the testers are using or if two are even needed.


#28

2 leds per button
double index
correct, the current setup is made to match the
[[color=#10cfbd]kaimana standard ](Kaimana RGB LED Board thread, RGB animations and more! SRK Tech Talk 2013 Product of the Year! in witch all main and alt buttons have 2 ws2812b chips per
[/color]


#29

job cuts
**seasons beatings :heartbreak: **
Good morning Tech Talk members

I recently lost my job.
This double sucks as it is the holiday season and it came without notice.

Long story short, i am a developer by trade (front, middle, back), you can check out my short bio profile on [color=#10cfbd]profile

Currently i am on a frantic search to be able to make it through the holiday season without bootstrapping anything and i have a few good leads.

I by no means am looking for a hand out, but i am looking to establish additional credibility in the industry through my personal projects such as moledcule

What would be awesome from you all at Tech Talk is if you could:

[list]
[]visit moledcule site
[
]download the chrome app
[]create a profile
[
]create a few themes
[/list]

Simply asking for 2 minutes of your time

Hey, i am a proud family man and it’s painfully humbling to even ask for this kind of help

thanks in advance for participating
seasons greetings to you all :heart:
[/color]


#30

Sorry to hear that man, hope you get back on your feet soon. I’ll be creating themes soon as my micro gets here, however, is there any other way to login other then Facebook? I deleted my account years ago. Maybe google+ or somthing would be nice.

In other news, my leds came in today. They actually come pre wired so it looks like ill only have to hotglue them on and solder jumper wires to the end that goes to the arduino. Will post pics when ive installed them.


#31

Single Sign On
Coming Soon
we are currently working on Google+, GitHub, Twitter

Pics
Ready when installed
look forward to seeing what you come up with


#32

Options Select
Tournament Mode Ready

[media=youtube]-be9mk1Rqrk[/media]
[list]
[] Hold LEFT + P1 for 3 seconds to engage tournament mode
[
] Hold LEFT + P1 for 3 seconds to disengage tournament mode (if previously set)
[*] Hold RIGHT + P1 for 3 seconds to simple mode
[/list]


#33

I tried loading the app at work, but it defaulted to my right hand screen (which isn’t hidden xD) and there was none of the usual windows windows buttons in the top right to take it from full screen and move it. Not sure if thats a bug or there is another way around it?


#34

as requested
frame bounds fixed

thanks for the suggestion, please fin in v0.9.9 you can now move the app window around, and apologies for any inconveniences it may have caused

[color=#10cfbd]v0.9.9
[/color]


#35

be merry, be happy
seasons beatings
hey all
we created a special holiday theme for all you joyous cats out there
[http://moledcule.club/srk/reply/holidays.png

[color=#FF0000]upload it today](http://moledcule.club/#/themes?theme=5848b6ee5c67330ed2b7a776)
[/color]


#36

Alright, my arduino micro finally came in today. Moledcule isnt detecting it however, are there any steps i should take when plugging it in? Keep in mind im not logged in as i have no Facebook.