Hi. My kaimana board is being idetified but still but not being detected. Any help? I included a link, with a screenshot showing what I mean. Thanks in advance. https://s27.postimg.org/mnxcgdv7n/Screenshot_37.png
are you on 10
i am downloading windows 10 now to see whats going on
The Windows 10 fix
Thanks everyone for your feedback. Managed to get the Windows 10 version up and running.
Thank you for the windows 10 update. My device is now connect and I am able to get the themes. For some reason the layout is not in sync, pressing one button lights up another. Before I loaded a theme , everything worked fine. Is there any way to see how the app is reading my board, is there some kind of button check? Thank you
You can rearrange your wiring by dragging the order around under the configuration section. What you have done is a good first step in creating a theme in the colors section
I’ll post a video later
I’m on a standard Kaimana.
Moledcule recognizes it as a USB device.
I put in my wiring order, flash my device and it’s wrong. Every time.
Do I need drivers?
I set it for Kaimana - Led Joystick - Fade on
- 8 buttons
please sen me you
link to your theme
if you take a look here at the [color=#10cfbd]themes list and select your theme. send me the link
it would look something like this
Here it is.
remove the balltop
for now, balltop support is kinda wonky and we are working on it.
simply remove it from you configuration and test that
If I remove the ball top from the sketch, it’s still in the daisy chain.
To get this to work I have to physically disconnect my ball top?
Is there a way to add the fade effect to the standard Kaimana sketch, or export the code for use in an Arduino Leonardo program?
Im using a PFS2.0 w/ a Khameleon. Using Jasen’s boards, what order do I need to put the buttons under wiring order?
Who’s talking about balls
Balltop LED in v1.0.3
After a long delay (sorry, have a FT job now), the almighty balltop color selector is now available!
Nice. Will try it again.
It’s all about to compile
Balltop Hot Fix in v1.0.5
fixed a small compile bug
Fash Original Code
Kaimana Restore - Fix in v1.0.6
fixed a bug that did not allow you to reflash the original Kaimana base code
Hey all, as per popular demand we have added more selectable modes.
To select a mode, you will hold a direction, and a button combination for 5 seconds
Moledcule (UP + P1)
This is the theme you created using the configurator
Tournament (UP + P2)
All light off
Solid (UP + P3)
After you see the lights light up solid color, release everything and then pick one of the displayed colors
Screen (UP + P4)
This is the screen save mode (crazy lights all the time)
XBOX (DOWN + P1)
XBOX Controller Theme Style
Playstation (DOWN + P2)
Playstation Controller Theme Style
TVC (DOWN + P3)
Madcatz TVC Stick Colors
Available now through http://moledcule.club
Is there anything special you have to do for a hitbox setup? It seems to not save any of my wire orders and just has them going to random spots. Using a UFB with a kaimana khameleon on win10 if this helps.
Take a look here
You need to open the “configuration” panel and drag your buttons around to the appropriate order
I’ve moved it around in the config and what it shows in the vid but it never seems to match what I put in the order. Buttons will be off by a bunch and I’m following the order I put the kaimana khameleon.
Mentioned this on twitter, but I haven’t had any luck flashing at all. I’ve attempted to flash on 3 separate computers, 2 on Windows’ Creator Update.
This worked before I just can’t figure out why it doesn’t work anymore, even attempting to flash using Arduino’s software hangs at flashing.
I recorded a video of what happens: