Problem with PS1 dual-mod Fightstick


Sorry to start a new thread. Had trouble searching for a similar problem.

So, I modded my 360 SE fightstick with a ps1 pad(Dual Shock H(late version)). The dual mod works great. Stick is fine on both ps3(with pelican) or 360.

The problem I have is, that the 360 pcb isn’t recognized properly. 90% of the time, when I plug it into a PC, the pc says I’ve connected a damage USB device. When plugged into a 360, it will not turn the system on and must be plugged in after the system is totally booted up or it will not be recognized.

This didn’t bug me to much at first, but as the months go by, it’s getting a little frustrating.


Did you make sure the grounds and 5v leads are connected on each pad?


Yes. Don’t think it’d work at all without those correct.


Sorry to pull up an old thread but Im very curious about the PS1 dual mod. Is it possible to use a PS1 pad (non dualshock) on a PS3 with a converter?


look at the converter thread, it’s in the stickies for crying out loud