Wow, this is great! It was time someone updated this and put it all together in a nice little package. I would always get the wires on the gamecube cable backwards and have to redo it to make it work.
Why are Switchcrafts recommended over Neutriks for wooden sticks? Does that include MDF?
Simpler to install - Neutrik Cat5e jacks are an awkward shape.
Nominated for an article. Good shit bro!
the way a neutrik jack is mounted is like making a sandwich between the faceplate of the neutrik and actual jack with stick case in between. you would need a really thin and strong piece of wood for this to work in wood or you would have to mount it to another thin mounting plate like rtdezign did in his tutorial. you wouldn’t be able to just use long screws either to hold the 2 pieces together because the release button on the neutrik wouldn’t be able to press after mounting in a certain thickness.
the switchcraft looks to have it’s mounting plate directly attached to the jack so you could just screw it directly into the wood.
anyways, just wanted to pop in and say nice tutorial. :tup:
Quick question –
Can the MC Cthulu ROM be flashed to ver 1.6x on Apple Macintosh OS X or do I have to flash the PCB on a PC/Windows machine? (Aware of Bridge, yes, but I have a pre-Intel Mac right now…)
Other than that, nice to see Saturn support is firming up on the MC Cthulu!
I have three leftover Saturn connector cords from failed dual-mod projects that are going to be “fixed” for RJ-45 over the next week!
Better head over to the Cthulhu thread and ask that. I don’t think so though with the flasher being a windows .net application.
Figured it’d be Windows… Lucky me inherited a PC from my dad, though!
I can offer SOME good news, though.
I got my Saturn cords RJ-45 adapted already. Took about 75-80 minutes of work for all three. It appears that the color labeling for the wiring is consistent for Sega, Hori, and Ascii brand connection cables. Verified this by my multimeter.
Here’s the color by wire going from left-to-right by Pin Position on the RJ-45 –
White (1) Black (2) Green (3) Grey (4) Orange (5) Red (6) Yellow (7) Blue (8)
Again, this is consistent among the 3 brands of Saturn connectors I have. More good news is that the stock connector lengths are plentiful. They range from 5-feet-plus to just under 10 feet!
I just cut down the 9th wire (the Brown) so that it didn’t interfere with the other wires. Brown should be Pin Position #6 on the Saturn’s connector end – the Pin Position we were told to skip.
I still double-checked on each wiring bundle to be sure before I crimped on the adapters.
Ha! I do that shit every time too. You think that because it was just 3 wires it would be more simple huh?
Also added information about Din Connectors.
Outstanding contribution, RTdzign ! I’ve been reading the R45 mod 2.0 plus this and everything is very well explained . Will be very handy shortly.
EDIT: However, the diameter of my Neutrik connector (NE8FBV) was 22 mm rather than 24 - confirmed on Neutrik’s web site.
Absolute Question and Answer Thread v.3 (ASK YOUR QUESTIONS HERE!)
So the Switchcraft RJ-45 feedthrough would also work with plastic/metal/thin holes right?
It will work anywhere you can hold it in place with two screws or a small bolt and nut.
Also, any Cat5 cable will do right? No benefits using regular (leftover) Cat5 over Cat5e/6?
I use leftover cat 5 cables. They work fine.
Quick question: I made a cable for NES, but when I plugged it in, it made my screen go blank and my system lock up. From the looks of it, the cable was the same as SNES just with the wires for 2 and 7 switched around. Any idea what might be the issue or what wires I might have misdone?
I suggest that you take a multimeter and triple check the pins to the RJ-45. Also I would boot the system up with the cord already in the system and then plug the ethernet jack end into the stick. NESes are prone to reset if you slightly move the system. Also double check this instructable by Toodles himself. I suggest that you just forget about the purposes of the wires and the similarities betweenNes and Snes circuit design and treat them like totally different systems. Just strictly think of the pin numbers to the G-V rows.
Hello, I am having trouble getting my Xbox1 cable to work with my MC Cthulhu RJ45 mod.
I have checked all the connections and they seem fine. I have also checked the MC Cthulhu board for voltage when connected to my Xbox1 and I get 4.53v.
Is there any other test I can do or do you have any ideas as to what it could be please?
did you update the firmware to 2.0? because the older firmware requires you to hold left (if I remember correctly) before plugging in the controller to activate xbox 1 mode.
Yeah. I thought it might be that after searcing the forums for answers. Unfortunatly it hasn’t worked.
Sorry man, there’s nothing special about the Xbox cable versus a regular USB cable except the funny end. If your stick will come up on a PC or PS3 properly, then it absolutely HAS to be a wiring problem in the Xbox1 cable.