Seimitsu Pushbutton, STICK, FOR SE STICK, HELP!


#1

WHAT SEIMITSU BUTTONS REPLACE THE ONES ON TE SE STICK, AND WHAT SEIMITSU STICK,

http://www.lizardlick.com/pages/joysticks.shtml

http://www.lizardlick.com/pages/pushbuttons.shtml

DID THE SEIMITSU STICK HAVE SHAFT COVER?


#2

Anything 30mm will be fine in terms of buttons. Hwoever, you’re probably going to have to file the hoels out a bit if you get the kind with the mounting bracket with them and want to use the brackets as well.

And, lookinf at the seimitsu sticks, they do look like they have shaft covers.


#3

LS-32-01 sticks do not have shaft covers, but on the plus side they should come with SS mounting plates, which are ideal for SE and TE sticks.


#4

I WILL GET THIS

6 PS 14 KN

2 PS 14 GN

WHAT IS THE DIFERENT, WHAT IS THE BEST OF THIS 2
LS 32

LS 32 -1

I PLAY ALOT OF SHOOTER ON 360

I THINK TE LS 32 - 1 WILL BE EASIER BECAUSE IT HAVE THE 5 PIN THING. CAN I USE THE ONE THAT COMES WHIT THE SE STICK, THE CABLE WHIT THE 5 CONECTORS


#5

get the LS-32-01 it connects easier to the harness.


#6

yes i noticed that

WILL I HAVE A PROBLEM INSTALLING THE BUTTONS, OR IT WILL BE EASY


#7

Easy. Pry the quick disconnects off with small flat head screw driver and pull at metal base with Needle nose pliers. “A” button you place the nut in first then screw in the button from top, other than that easy.


#8

thanxs


#9

turn off caps lock please


#10

I love how he went from normal to caps.


#11

Feel the power of CAPS!!!


#12

Im trying to install a LS 32 01 into my TE right now. I know you have to mount it sideways from the JLF. I’m trying to use the screws from the JLF but they seem too big for the other mounting bracket. Do I use smaller screws, and if so what size screws are they?


#13

to install the ls-32-01 did a have to solder anything, is there a video tutorial, or only put it sideways an thats all?

will the 5-pin wiring harness be in place, or i have to modified something?


#14

BOTH OF YOU! LOOK AT THIS!! http://pineconeattack.com/2009/08/06/how-to-mod-the-madcatz-fight-stick-with-seimitsu-parts/


#15

thanxs man , exactly what i needed


#16

That link doesn’t answer my question. Thanks for trying though.


#17

Um…mine screwed in perfectly…


#18

Good luck with your mod.