Taking off the turbo area from an SE


#1

Hey SRK,

I’m painting my SE case as part of the mod and I need to get the turbo/home area off. I unscrewed it easily enough from the case itself, but the pcb seems to be in there pretty tight. Any tips for getting that out?

Thanks.


#2

There are two screws on both sides of the panel when you take off the metal plate on the bottom. I’m sure the PCB and everything else is only secured by screws as well.


#3

I was able to get it. I had removed the four screws holding the pcb on and the two holding it to the case. After it was loose I had to push down on both buttons and the faceplate came off.

Thanks for the tip though, Syn.