TE stick modding question


#1

Ok so i’m planning on dual modding my PS3 TE stick. Now I want to replace the original PCB with a MC cthulhu board. I also want to now if there is a website where i can buy a xbox 360 stick PCB, because I don’t want to use a controller PCB. I also don’t want to lose turbo and home button functionality


#2

easiest thing to do is sell your PS3 TE and get a 360 TE


#3

I don’t think that would be an option since my stick is used and if I would sell this one I would have to pay extra for the new stick.


#4

Well then you’ll be loosing the turbo function as you’ll have to use a controller pcb, there’s no point changing to the cthuhlu if you don’t want to loose the turbo function.

i dont’ think you’ll be able to buy the 360 pcb unless you get a 360 SE or TE


#5

I see. So I got no other option than to buy a 360 controller huh? Too bad.


#6

Thats correct, i think you have no choice but to do the pad hack and also the hex inverter mod if you want to use the trigger buttons.


#7

Ok, thank you for the answers. I just want to know one more thing. Can I use an official 360 controller or are there any controllers you would recommend.


#8

you will need a common ground controller to do the dual mod.

I believe the mad catz controllers from gamestop are common ground. Your best bet is to have a look at the 2 pcbs thread, has tons of info.


#9

we can split a te. i get the case you get the internals and all (buttons joystick, pcb turbo wires) pm if interested