or Sanwa RGs
Can you use a Neutrik USB port instead of the stock Pro Cable port?
My other question is that does the Left Stick/Right Stick/D-Pad function still work?
Sure. You just need to mod the case to make it fit and forgo the USB connectors on the EZ MOD.
For the TE2+ version, yes, the LS/RS/DP switch works.
Sorry if this is the wrong place to ask but is there a way to have the LS/RS/DP switch work on the old T.E.2 with the EZMOD pcb?
No, it would require a redesign of the board. I chose to not implement that in favor of setable buttons for the various other buttons on the UFB.
Oh I see, well thanks for the help.
DOUBLE POST fo-giv-a-nes prease!!!
Been doing a lot of house keeping on SRK the last few weeks; Cleaning up my [WTT/WTB TO thread](WTT: Lots of sticks / parts / & misc’s added | WTB: MAS and Diamond VLX arcadesticks Finding new homes for some sticks that never really felt right in my Tony Robbins’ banana hands, Organizing the trunk of funk that is my storage locker/parts bin, And now finally trying to wrap up some builds that were perpetually stuck at 75% complete.
So here’s my attempt to make a MadCatz TE2 SE
[list] MadCatz XBox 360 TE2 shell from a local trade
 @“Jasen Hicks” 's TE2 EZ MOD kit
 @armi0024 & @SusanInParadise 's presoldered headers Brook UFB PCB ( I just removed the plastic guide on the J5 pins so that the EZ MOD and UFB would play nice together )
 @armi0024 & @SusanInParadise 's PAS Universal S Adapter Plate
 @mdsfx MadCatz TE2 red bezel
 Seimitsu LS-38 SC lever from @Needlecrash
 Seimitsu LB-35 red ball top from @hibachifinal
 Seimitsu PS-14-GN-C colored rims from @hashrate
 Seimitsu PS-14-GN-C black plungers & rims from @slaycruz
 Seimitsu PS-14-DN-C colored rims from @TRIEU
[*] Seimitsu PS-14-DN-C black plungers from @“NiFTY NuGGET”
Nice LS-32 in that TE2
It’s actually a LS-38 but thanks nonetheless
Just got the EZMOD board and having a little problem. The 2 buttons at the top doesn’t seem to work. Was also wondering what the PS3/PS4 switch does.
Did you install the jumpers on the headers to set them to a function? If you didn’t they won’t do anything.
Do you mean the green and red * ? Then No I didn’t but can you explain on how to install the jumpers? I’m completely new to modding.
Please watch the video for the mod, I explain where to install the little plastic jumpers in there. its not hard, you just install them by putting them on a set of pins so that the buttons behave as you want them to.
You mean the J8 & J4? I thought you meant I had to connect JP4/JP5 to something. I have J4 and J8 connected and the turbo functions don’t seem to work.
JP4 and JP5 are 2x4 headers. There is a graphic printed on the board that shows jumpers need to be installed to connect a button to each. Additionally, all the wires need to be connected from the aux board to the EZ MOD and then from the EZ MOD to the UFB.
Please show pics of your install, otherwise I am just shooting in the dark here.
As suspected, there are no jumpers installed on JP4 and JP5. You should have gotten them in your kit. You see that graphic that shows L3/R3/TP/Turbo with like a rectangle? That indicates how you set each button by installing the jumper connecting the pins. The jumpers look like these:
That’s strange, I never got those in my kit. Since they probably never came with my kit, is there a place to purchase them?
I would contact wherever you bought it and ask them to send you some; they are supposed to be in the kit. Worst case, you can get 100 (so you will have 98 spares) from amazon: https://www.amazon.com/2-54mm-Standard-Computer-Jumper-100pack/dp/B00N552DWK/ref=sr_1_1?ie=UTF8&qid=1489655313&sr=8-1&keywords=PC+Jumpers