WTS: MeisterDwarfs Blank custom cases


#1

MeisterDwarfs Blank Custom Cases- NOW OPEN!
Finally I opened up the online sale. I have been looking forward to do this in a long time, and I hope you guys can make it possible for me to keep building these cases! Pictures of the cases can be seen in my other thread http://forums.shoryuken.com/showthread.php?t=195083 but some will be added here tomorrow too!
What do you get if you buy one of my cases?
Most of the cases will look like this:
? Beautiful lacquered Exotic wood case with button holes on the back for either 3 (START, SELECT, HOME), 3 +1 (START, SELECT, HOME, hole for NEUTRIK USB connector) or 4 holes+ 1 (START, SELECT, HOME, OTHER, NEUTRIK USB connector). The cases will fit sanwa JLF-TP-8YT or Seimitsu LS-32-01
? Clear Plexiglas top sheet with 6 button layout ( you can normally choose your own layout)
? Bottom sheet: Either plexi or ?hardboard?
? 4XRubberfeet ( Black or White)
? Needed screws, Bolts, Nuts and Washes to mount your stick and bottom sheet

Up for sale right now:
Zebrano case 1: 3 holes + 1 (START, SELECT, HOME and 1 hole for Neutrik usb connector). Lacquered inside! Clear plexi top and bottom sheet. Can fit sanwa JLF-TP-8YT or Seimitsu LS-32-01 $115
Padouk case 1: 4 holes + 1((START, SELECT, HOME, OTHER, NEUTRIK USB connector)) Lacquered inside! Clear plexi top and bottom sheet.Can fit Sanwa JLF-TP-8YT or Seimitsu LS-32-01. 105$
American walnut case 1: 3 holes (START, SELECT, HOME). Lacquered inside. Clear plexi top and bottom sheet. Can fit sanwa JLF-TP-8YT and Seimitsu LS-32-01. $100 (SOLD to a friend in Denmark)
American walnut case 2: 3 holes + 1(START, SELECT, HOME, hole for NEUTRIK USB connector)). Clear plexi top and bottom sheet Can fit sanwa JLF-TP-8YT or Seimitsu LS-32-01. $100
Jatoba case 1: 3 holes (START, SELECT, HOME). Lacquered inside! Clear plexi top and bottom sheet. Can fit Sanwa JLF-TP-8YT or Seimitsu LS-32-01. 90$
Merbau case 1: (from earlier pruduktion) 3 holes (START, SELECT, HOME). Lacquered inside. Clear plexi top Hardboard bottom sheet. Can fit Sanwa JLF-TP-8YT or Seimitsu LS-32-01. $90

Near future cases for sale with ?add ons?:
These cases will be delivered like this as standard:
? Beautiful lacquered Exotic wood case with button holes on the back for either 3 (START, SELECT, HOME), 3 plus 1 (START, SELECT, HOME, 1 hole for NEUTRIK USB connector)) or 4 holes plus 1 (START, SELECT, HOME, OTHER, NEUTRIK USB connector)). The cases will fit sanwa JLF-TP-8YT or Seimitsu LS-32-01
? Clear Plexiglas top sheet with 6 button layout ( you choose your own layout)
? Bottom sheet: ?hardboard?
? 4X Rubberfeet ( Black or White)
? Needed screws, Bolts, Nuts and Washes to mount your stick and bottom sheet

Here are the ?add ons? that also can be made for these cases:
? Inside lacquering +$ 6
? Plexi top: Black, White, Red or Mirror +8$ or bottom sheet: Clear +$4. Black, White, Red or Mirror +8$
? Painted top sheet (while looking at the bottom of the case): Red, Black, White, Grey + $5

I have these cases that can be made as soon as possible when ordered. They are glued together and just need to be routed and lacquered!

Zebrano 2: 4 holes + 1((START, SELECT, HOME, OTHER, NEUTRIK USB adaptor) $120 http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013263.jpg more pics on my photobucket user. Search MeisterDwarf

Zebrano case 3: 3 holes (START, SELECT, HOME) $105 http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013258.jpg http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013259.jpg

American walnut case 3: 4 holes + 1((START, SELECT, HOME, OTHER, NEUTRIK USB connector) $100 http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013253.jpg

Jatoba case 2: 3 holes + 1 (START, SELECT, HOME and 1 hole for Neutrik usb connector)). http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013256.jpg

Sipo mahogany /Utile case 1: 3 holes (START, SELECT, HOME) $ 90 http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013270.jpg

Sipo mahogany/ Utile case 2: 3 holes (START, SELECT, HOME) a more compact case than normal $ 90 http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013270.jpg

Merbau case 3: 3 holes (START, SELECT, HOME) http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013271.jpg

I could be willing to build 2 COMPLETE arcade sticks, as akihabarashop opens in this week, and could order as soon as they do. PM me if your interested.

Other products:
? New Mad catz ( 2007) common ground controller 25$
? Wired Mad catz ( 2007) common ground controller PCB with quick 0.110 spade terminals. Works with A,B, X, Y, RB, LB, START, BACK and GUIDE. ( The directions on the controller are not wired as I have no extra wire harness. Though are the signals tined so it?s really easy to solder these yourself )$ 45
? Assembled Cthulhu board with terminals $47
? Imp board assembled $ 12 - ordered and hopefully on its way from Lizard Lick soon!
? Toodles axisadaptor assembled $ 26 - ordered and hopefully on its way from Lizard Lick soon!
? Dualmod Cthulhu+ Mad Catz controller (piggy back- 2 USB cables needed) $95
? Black 10ft USB 2.0 A~B CABLE $ 4
? NEUTRIK USB NAUSB-W-B Black or nickel $7
Hope you like the prices! There is just one little but?? I live in Denmark and not the us? Shipping is very expensive here in Denmark, and I have to find a way to get the cases to you guys and girls as cheap as possible!!
My idea is to ship all the cases to just ONE of you guys in the US, who then is going ship the cases out to all who ordered. It has to be a trusted person who people have faith in. This great person will off cause be rewarded for his trouble with either some discount, pcb or something else nice and a big big thanks from my side!! He will also get first priority reserving the case he like the most! Hope someone out there is ready to do this
To get it as cheap as possible we need 7-10 orders before I ship? A 40 pounds package will cost about $189.82 to ship to usa. If 10 order it?s about $19 each from Denmark. Then you have to plus shipping from the US to you.
Please let me hear what you think?..

Thanks
Rune Burgaard


#2

Nice! I may be interested in one of these:

-Zebrano case 3: 3 holes (START, SELECT, HOME) $105
-Sipo mahogany/ Utile case 2: 3 holes (START, SELECT, HOME) a more compact case than normal $ 90
-American walnut case 1: 3 holes (START, SELECT, HOME). Lacquered inside. Clear plexi top and bottom sheet. Can fit sanwa JLF-TP-8YT and Seimitsu LS-32-01. $100
-Jatoba case 1: 3 holes (START, SELECT, HOME). Lacquered inside! Clear plexi top and bottom sheet. Can fit Sanwa JLF-TP-8YT or Seimitsu LS-32-01. 90$

but I’m not sure which wood is which so I can wait for some pics


#3

Hi Sahykoh, I have updated the first post with links to pictures. The cases are not Lacquered but you can see the finished cases to see how they will turn out;)

Thanks Rune