WTS: MeisterDwarfs Custom sticks

Hi Guys

I now try to open up for my online sales once again. This time with a few changes. I have been looking forward to do this in a long time, and I hope you guys can make it possible for me to keep building these cases!

What do you get if you buy one of my cases?
? Beautiful lacquered Exotic wood case with button holes on the back for either 3 (START, SELECT, HOME), 3 +1 (START, SELECT, HOME, hole for NEUTRIK USB connector) or 4 holes+ 1 (START, SELECT, HOME, OTHER, NEUTRIK USB connector).

? The cases will fit sanwa JLF-TP-8YT or Seimitsu LS-32-01

? Clear Plexiglas top sheet with 6 button layout ( you can normally choose your own layout)

? Bottom sheet: Either plexi or ?hardboard?

? 4XRubberfeet ( Black or White)
? Wired up for Xbox 360- MadCatz common ground controller ( If you are willing to pay a little more, you can also choose A Cthulhu Board for ps3/pc support, a dual mod solution or even a wireless stick with sixaxis pcb and axisdaptor.
? 1x LS 32 with standard ball top(red, black, white and pink ( I also have one sanwa JLF-TP-8YT on stock)
? 6X 30mm buttons (Black or White Seimitsu PS-14-GN or pink Seimitsu PS-14-KN (I also have 6x seimitsu PS-14-KN, clear and 6x PS-14-K red buttons on stock)
? 3x 24 mm buttons (Black or white Seimitsu PS-14-DN)
? Choose your own artwork

Up for sale at the moment:
:
Zebrano case 1: 3 holes + 1. Lacquered inside! Has Clear plexi top and bottom sheet. Has Hori 6 bottom layout and made for Seimitsu LS-32-01. With NEUTRIK USB connector $182

Padouk case 1: 3 holes. Hard wood bottom sheet. . Can fit Sanwa JLF-TP-8YT or Seimitsu LS-32-01. $172

Sipo mahogany /Utile case: 3 holes. Hard wood bottom sheet. Can fit Sanwa JLF-TP-8YT or Seimitsu LS-32-01. $170

Padouk case 1: 4 holes + 1.Lacquered inside! Clear plexi top and bottom sheet. Can fit Sanwa JLF-TP-8YT or Seimitsu LS-32-01. $182

Jatoba case. Clear plexi top and bottom sheet. Fits Seimitsu LS-32-01. Has Hori 6 bottom layout and made for Seimitsu LS-32-01. With NEUTRIK USB connector $173

Merbau case: 3 holes.(from earlier pruduktion) 3 holes. Lacquered inside. Clear plexi top Hardboard bottom sheet. Fits Seimitsu LS-32-01. $170

Zebrano case 2: 3 holes. Hardboard bottom sheet. Can fit Sanwa JLF-TP-8YT or Seimitsu LS-32-01. $174

Jatoba case 2: Lacquered inside! Clear plexi top and bottom sheet. Can fit Sanwa JLF-TP-8YT or Seimitsu LS-32-01 $170

American black walnut case: 3 holes + 1(. Clear plexi top and bottom sheet. Fits Seimitsu LS-32-01. Has Hori 6 bottom layout and made for Seimitsu LS-32-01. With NEUTRIK USB connector $ 175

Here are some pictures of the cases I?m offering:
From top and down
? Zebrano 1
? Padouk 1
? Sippo
? Padouk 2
? Jatoba
? Zebrano 2
? Jatoba 2
? American black walnut

http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013491.jpg

http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013486.jpg

http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013498.jpg

Here is the latest stick i made for myself

http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013605.jpg

http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013622.jpg

http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013624.jpg

http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013614.jpg

http://i879.photobucket.com/albums/ab351/MeisterDwarf/P1013590.jpg

I live in Denmark, and shipping here is very expensive. Its tough for me as a seller and you as a buyer. I really have tried to make the prices on my cases as low as possible so that it still can be a good deal for you.
Sending one package ( 3kg) from Denmark to the US will cost $55, and I cant find any cheaper ways doing it.
Shipping can be cheaper if more guys from US order together. A 4 kg package cost $63.5and a 5 kg package cost $71.5

Please let me hear what you guys think

Thanks
Rune

People will pay for this quality work. Good luck sir!

How much for that first Zebrano dual-modded?

Thank you very much!!

With an IMP board or Piggy back?

Rune

I was thinking a CHIMP. Also, is the joystick mounting height correct?

You got PM

the mouting high with the ls32 in Zebrano case 1 is between 24-25mm. Closest to 24mm i think, so yes, the mounting high is correct;)

Rune

If we provide you with the art, do you print it and put it on the stick, including button inserts? If thats the case then its complete and usable when it arrives?

just thought id drop in here and say that the quality of these cases look dope!

if i wasnt having byrdo working on a stick for me right now id hop on these. STELLAR!

I know! I want that blackwalnut case. I got art already made for it and everything. Just need to have a few things cleared up and I may pull the trigger!

PM Sent!

Yes, Ill use the art you guys provide me and put in the stick. I can put the art inside the buttons too, but that will cost a little more m8. I will make the sticks 100% good to go, so that you can play on it when it arrives!

Thank you for the kinds words man;) Im sure you get a nice stick from Byrdo too.

PM sent back:)

I feel your pain regarding US shipping costs. How is shipping to Norway though?

Thank you for your understanding! Its so sick how much Post Denmark is charging :frowning: To Norway with post.dk its $42,12 if you are interested in a stick, i will try to contact dhl or gls tomorrow and hear what price they can offer.

Thanks Rune

Hey mamut5, do you have any idea what postage to Australia (Perth) would be? I’m used of having to pay ridiculous postage prices :wink:

Awesome looking sticks.

Thanks m8!

All of us are not that lucky getting things shiped as cheap as we want to hehe;)

Shipping to Australia is $59

Thanks Rune

Your inbox is full, can’t send you a pm.

Try again now please

Rune

UPDATE: If People want other buttons than I have in stock, I can order the ones you like from akihabarashop.jp. If its standard Buttons you want, just add shipping cost which is about $10 for Air mail to the total price and no more. If its more expensive buttons You have to add the additional cost too.

L-dubb: I have tried to PM you…