Xbox 360 Dual Mod Help


#1

Hello,

I bought a Xbox 360 Te-s stick, and am dying to dual mod it. I have a ps3 controller. But I haven’t really found any write ups for that kind of set up. Would it even work? If there is anyone near me that can do it too I would rather just hand it to them, but if there is a write up someone can point me to I am pretty handy to do it myself, just want to make sure I don’t jack things up.


#2

You cannot use a PlayStation 3 Controller unless it is Common Ground.
You cannot use SIXAXIS or DualShock 3 unless you make it Common Ground.

The Leo Board from Gummowned turns SIXAXIS into Common Ground.
http://shoryuken.com/f177/project-leo-sixaxis-wireless-360-dual-mod-194525/

Best way to Dual Mod Xbox 360 for PlayStation 3 is with ChImp from Toodles.
And with that, there are many, many Threads.
I’m sure you found those.


#3

Thank you for that answer. Totally sucks though ha.


#4

Why is that?


#5

http://shoryuken.com/f177/cheap-ps3-controller-common-ground-pcb-247008/

The Komodo pad mentioned in this post is common ground and are cheap as hell, your just need to drill a hole for a dpdt switch for the usb data lines

I just used a chimp to dual mod mine well worth the money


#6

Well because I already had that controller… I was reading the guide you sent me to look at for the dual mod… But the parts on the site are all new, so I just want to make sure I am buying the right parts, and do I still need the imp board. If I am correct is it…
Toodles Cthulhu for PC/PS3 and Toodles Imp Board ? Sorry if they are noob questions just don’t like wasting money you know.


#7

Just buy the ChImp.
No need for the Imp Board if get ChImp.

The ChImp makes for Automatic Detection of PlayStation 3 and Xbox 360.
Using the Imp, you will have to hold down a Button while plugging in the Arcade Stick.

We can do it for you.
http://shoryuken.com/f226/james-james-so-cal-modding-246549/


#8

Or you could go with an easier solution and get a dual strike and TEasy board without having to worry about having someone solder the parts for you and just plug it in yourself.

http://shoryuken.com/f177/project-teasy-mod-your-solderless-solution-te-dual-modding-234867/

I still believe phreak still has Te-s boards for saleZ. Another option to consider. Hope this helps. :slight_smile: