Okay. I have my lumber MDF (3/4)".
It’s in pieces at the moment. And I have to reduce each of my sides by (3/4)" because I forgot to compensate for width when I had it cut at Home Depot.
I’m going to hinge and latch the top.
But that isn’t my problem.
I need a 10 button CP.
I want to model it after my T5 Hori. I found one in the template/stencil thread, but it only had a 6 button CP.
I need 2 buttons offset lower; what would traditionally be L1 + L2 on a PS2 stick.
Then, a little higher, a straight row of 6. And above that , the set of two for start/select.
I do play games offline. Which is why I need the buttons for 3xP and 3xK.
I enjoy using Dan in Street Fighter Alpha for PC and it’ll make it tons easier to put in the code.
I have my 1_(1/8)" bit for drilling out button holes. They’re Yumex buttons.
The stick is an IL Eurostick. So I’m confused as to what size hole I need for it.
And every stencil I looked at so far has a different size for the stick’s hole. So …what bit do I use?
I go Monday to have it drilled out. I have a friend locally with a drill press who has agreed to help me. So I kinda’ need to know before then.
I promise to post pictures when I get the enclosure together and painted. =)
Thanks for whatever help you can give me. And feel free to merge this thread if there’s a better place for it.
I did search first. I promise.